For the John Deere 2150, coolant capacity is 2.75 gal (10.4 L). Coolant choice is listed as John Deere Cool-Gard II, with 60/40 coolant and water mix guidance.
Coolant capacity2.75 gal (10.4 L)Cooling system refill amount
Antifreeze mix60/40 coolant and water mixFreeze/boil protection
John Deere 2150 Coolant Capacity Specs
Coolant capacity
2.75 gal (10.4 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
60/40 coolant and water mix
Engine horsepower
45.1 hp
Engine displacement
2.9 L (177 cu in)
John Deere 2150 Coolant Capacity Guide
Coolant capacity guide
This model
2.75 gal
Class low
1.5 gal
Class typical
3.5 gal
Class high
6 gal
Compared with a broad compact tractor guide, not the full tractor dataset.
John Deere 2150 Coolant Service Notes
Coolant capacity note
For the John Deere 2150, the coolant capacity is 2.75 gal (10.4 L). That is the buying and refill guide for a full cooling-system service
Coolant service note
For a full coolant service on the John Deere 2150, plan around 2.75 gal (10.4 L) and match the listed coolant guidance: John Deere Cool-Gard II and 60/40 coolant and water mix
Coolant type note
The John Deere 2150 coolant type is John Deere Cool-Gard II. Wrong coolant chemistry can reduce corrosion, freeze and boil protection
Antifreeze mix note
The listed mix for the John Deere 2150 is 60/40 coolant and water mix. Keep the coolant strength in range after a drain, flush or top-up
Refill check
After a drain and refill on the John Deere 2150, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
Engine context
The engine context for the John Deere 2150 is engine horsepower 45.1 hp and engine displacement 2.9 L (177 cu in). Use this for comparison only; the refill amount is the coolant capacity above
John Deere 2150 Coolant Capacity FAQ
How many litres of coolant does the John Deere 2150 take?
The cooling system capacity for the John Deere 2150 is 2.75 gal (10.4 L). This is the main refill figure for a drain, flush or coolant change
What coolant chemistry should the John Deere 2150 use?
For the John Deere 2150, the coolant type is listed as John Deere Cool-Gard II. Avoid mixing incompatible coolant products
What mix ratio should I use when refilling the John Deere 2150?
The listed antifreeze mix for the John Deere 2150 is 60/40 coolant and water mix. Use the correct mix for freeze, boil and corrosion protection
How do I avoid air pockets when refilling the John Deere 2150 coolant?
Fill the John Deere 2150 slowly, run it with the heater/thermostat cycle where applicable, let it cool and check the level again. That helps catch trapped air
Should old coolant be drained from the John Deere 2150?
Flush the John Deere 2150 cooling system if the coolant is dirty, contaminated, badly diluted or overdue for service. A simple top-up does not fix old coolant chemistry
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
