The Case IH 9230 specifications include engine power rated at 235 hp (175.2 kW), a full power shift transmission and a listed weight of 18,000 to 24,106 lbs.
Case IH 9230 key specifications
| Engine power |
235 hp (175.2 kW) |
| PTO power |
207 hp (154.4 kW) |
| Displacement |
504.5 cu in (8.3 L) |
| Transmission |
full power shift |
| Fuel capacity |
115 gal (435.3 L) |
| Weight |
18,000 to 24,106 lbs |
| Wheelbase |
120.4 inches (305 cm) |
Case IH 9230 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power235 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power207 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity115 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight24,106 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase120.4 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 9230 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power177.5 hp
Case IH 9230 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity435.3 L
Case IH 9230 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
4.488 × 5.315 inches (114 × 135 mm) |
| Rated RPM |
2,200 |
| Torque |
701 lb-ft (950.6 Nm) |
| Torque RPM |
1,500 |
| Compression |
16.5:1 |
| Air cleaner |
dual paper elements |
| Oil capacity |
22 qt (20.8 L) |
| Coolant capacity |
29.6 qt (28.0 L) |
| Starter volts |
12 |
Transmission options
| Gears |
12 forward and 3 reverse |
| Clutch |
hydraulic wet disc |
PTO and hitch
| Drawbar (tested) |
177.51 hp (132.4 kW) |
| PTO (tested) |
218.20 hp (162.7 kW) |
| Rear hitch category |
Category III (optional) |
| Hitch control |
draft control (optional) |
| Rear lift |
12,750 lbs (5,783 kg) |
| Rear PTO |
independent (optional) |
| Rear PTO speed |
1,000 rpm |
Hydraulics
| Hydraulic capacity |
18 gal (68.1 L) |
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,500 psi (172.4 bar) |
| Valves |
4 |
| Total flow |
28 gpm (106.0 L/min) |
Mechanical specifications
| Final drives |
inboard planetary |
| Differential lock |
front and rear (optional) |
| Steering |
hydrostatic power with articulation and front-axle steering |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
125 |
| Batteries |
2 |
| Battery CCA |
625 |
| Battery volts |
12 |
Dimensions and weight
| Length |
241.6 inches (613 cm) |
| Width |
119.5 inches (303 cm, axles) |
| Shipping weight |
18,000 lbs (8,164 kg) |
| Operating weight |
24,106 lbs * Weight with 18.4R38 duals. 10,934 kg |
| Exhaust height |
129.6 inches (329 cm) |
| Rear axle bar |
4.0 × 119.5 inches (101 × 3,035 mm) |
| Maximum permitted weight |
26,000 lbs (11,793 kg) |
Tires and tread
| Front tread |
60 to 130 inches (152 to 330 cm) |
| Rear tread |
60 to 130 inches (152 to 330 cm) |
| Front tire |
18.4-38 |
| Rear tire |
18.4-38 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
