The New Holland TG210 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 38.6 gpm | 146.1 lpm, hydraulic pressure is 2930 psi | 202.0 bar, and hydraulic type is closed center load sensing.
Hydraulic Flow38.6 gpm | 146.1 lpm
Pressure2930 psi | 202.0 bar
Hydraulic Typeclosed center load sensing
Valves / Remotes3 to 5
Lift Capacity13960 lbs | 6332 kg
New Holland TG210 Hydraulic Capacity & Flow Specs
Hydraulic type
closed center load sensing
Hydraulic pressure
2930 psi | 202.0 bar
Pump flow
38.6 gpm | 146.1 lpm
Hydraulic valves
3 to 5
New Holland TG210 Hitch, Remote & Lift Specs
Rear hitch type
III/IIIN
Rear hitch control
position and electronic draft control
Rear lift at 24 inches
13960 lbs | 6332 kg
New Holland TG210 Useful Hydraulic Calculations
Rear lift per pump gpm
361.7 lb per gpm
Estimated hydraulic horsepower
about 66 hydraulic hp from listed pressure and pump flow
New Holland TG210 Hydraulic Comparison Charts
Pump flow comparison
This model
38.6 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Hydraulic pressure comparison
This model
2,930 psi
Average
3,100 psi
Low
2,600 psi
High
3,700 psi
Rear lift comparison
This model
13,960 lb
Average
15,500 lb
Low
9,000 lb
High
26,000 lb
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TG210 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Hydraulic wet disc brakes
Differential lock
electro-hydraulic
New Holland TG210 Hydraulic Capacity FAQ
Why is the New Holland TG210 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TG210, but pump flow is 38.6 gpm | 146.1 lpm, pressure is 2930 psi | 202.0 bar, system type is closed center load sensing, and lift is listed as 13960 lbs | 6332 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TG210 hydraulics feel fast or slow?
The useful speed clue is 38.6 gpm | 146.1 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the New Holland TG210 hydraulic pressure tell you?
The pressure spec is 2930 psi | 202.0 bar, close to the 3,100 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the New Holland TG210?
On the New Holland TG210, 38.6 gpm | 146.1 lpm pump flow points to slower loader and cylinder movement, 2,930 psi pressure affects force more than speed, and 13,960 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TG210?
For implement matching, the useful checks are 38.6 gpm flow, 2,930 psi pressure, 13,960 lb listed lift, and 3 to 5 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and normal on pressure for the class, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TG210 rear lift capacity strong?
The listed lift figure is 13960 lbs | 6332 kg, close to the 15,500 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the New Holland TG210 hydraulic remotes enough?
The New Holland TG210 remote/valve listing is 3 to 5. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland TG210 hydraulics handle long hydraulic jobs?
The useful heat clues are 38.6 gpm flow, 2,930 psi pressure, and about 66 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland TG210 make on paper?
Using 2,930 psi and 38.6 gpm, the rough pressure-flow estimate is about 66 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the New Holland TG210 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III/IIIN, hitch control is position and electronic draft control, and listed lift is 13960 lbs | 6332 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
