The New Holland TT60A tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 10.8 gpm | 40.9 lpm, hydraulic pressure is 2755 psi | 190.0 bar, and hydraulic type is open center.
New Holland TT60A Hydraulic Capacity & Flow Specs
| Hydraulic type | open center |
|---|---|
| Hydraulic pressure | 2755 psi | 190.0 bar |
| Pump flow | 10.8 gpm | 40.9 lpm |
| Total hydraulic flow | 19.3 gpm | 73.1 lpm |
| Steering flow | 8.5 gpm | 32.2 lpm |
| Hydraulic valves | 0 to 2 |
New Holland TT60A Hitch, Remote & Lift Specs
| Rear hitch type | II/I |
|---|---|
| Rear hitch control | position control |
| Rear lift at ends | 2930 lbs | 1329 kg |
New Holland TT60A Useful Hydraulic Calculations
| Total flow vs pump flow | 178.7% of listed pump flow |
|---|---|
| Steering flow vs pump flow | 78.7% of listed pump flow |
| Rear lift per pump gpm | 271.3 lb per gpm |
| Estimated hydraulic horsepower | about 17.4 hydraulic hp from listed pressure and pump flow |
New Holland TT60A Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TT60A Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Wet disc brakes |
| Differential lock | mechanical rear |
New Holland TT60A Hydraulic Capacity FAQ
Why is the New Holland TT60A hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TT60A, but pump flow is 10.8 gpm | 40.9 lpm, pressure is 2755 psi | 190.0 bar, system type is open center, and lift is listed as 2930 lbs | 1329 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TT60A hydraulics feel fast or slow?
The useful speed clue is 10.8 gpm | 40.9 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the New Holland TT60A hydraulic pressure tell you?
The pressure spec is 2755 psi | 190.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the New Holland TT60A?
On the New Holland TT60A, 10.8 gpm | 40.9 lpm pump flow points to slower loader and cylinder movement, 2,755 psi pressure affects force more than speed, and 2,930 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TT60A?
For implement matching, the useful checks are 10.8 gpm flow, 2,755 psi pressure, 2,930 lb listed lift, and 0 to 2 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TT60A rear lift capacity strong?
The listed lift figure is 2930 lbs | 1329 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland TT60A hydraulic remotes enough?
The New Holland TT60A remote/valve listing is 0 to 2. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland TT60A hydraulics handle long hydraulic jobs?
The useful heat clues are 10.8 gpm flow, 2,755 psi pressure, and about 17.4 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland TT60A make on paper?
Using 2,755 psi and 10.8 gpm, the rough pressure-flow estimate is about 17.4 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the New Holland TT60A hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/I, hitch control is position control, and listed lift is 2930 lbs | 1329 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
