The Case IH MX215 Magnum tractor hydraulic capacity is 45.5 gal | 172.2 L, pump flow is 38.6 gpm | 146.1 lpm | 58 gpm (Optional) | 219.5 lpm, and hydraulic type is PFC.
13,960 lbs | 6332 kg | 15,970 lbs (Optional) | 7243 kg
Case IH MX215 Magnum Useful Hydraulic Calculations
Rear lift per hydraulic gallon
306.8 lb per gal
Case IH MX215 Magnum Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
45.5 gal
Average
42 gal
Low
22 gal
High
80 gal
Pump flow comparison
This model
38.6 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Rear lift comparison
This model
13,960 lb
Average
15,500 lb
Low
9,000 lb
High
26,000 lb
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH MX215 Magnum Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power
Brakes
hydraulic wet disc brakes
Case IH MX215 Magnum Extra Hydraulic Notes
Total flow
38.6 gpm | 146.1 lpm
Case IH MX215 Magnum Hydraulic Capacity FAQ
Is the Case IH MX215 Magnum hydraulic capacity big or small for its size?
The Case IH MX215 Magnum lists 45.5 gal | 172.2 L of hydraulic capacity, which is close to the 42 gal benchmark for this group. It is a normal-sized hydraulic oil volume for this tractor class, so the bigger performance clues are flow, pressure and lift.
Will the Case IH MX215 Magnum hydraulics feel fast or slow?
The useful speed clue is 38.6 gpm | 146.1 lpm | 58 gpm (Optional) | 219.5 lpm total hydraulic flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Case IH MX215 Magnum?
On the Case IH MX215 Magnum, 38.6 gpm | 146.1 lpm | 58 gpm (Optional) | 219.5 lpm total hydraulic flow points to slower loader and cylinder movement and 13,960 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH MX215 Magnum?
For implement matching, the useful checks are 38.6 gpm flow, 13,960 lb listed lift, 3 to 5 remote/valve listing, and III hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH MX215 Magnum rear lift capacity strong?
The listed lift figure is 13,960 lbs | 6332 kg | 15,970 lbs (Optional) | 7243 kg, close to the 15,500 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the Case IH MX215 Magnum hydraulic remotes enough?
The Case IH MX215 Magnum remote/valve listing is 3 to 5. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH MX215 Magnum hydraulics handle long hydraulic jobs?
The useful heat clues are 45.5 gal of hydraulic capacity and 38.6 gpm flow. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
What do the Case IH MX215 Magnum hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III and listed lift is 13,960 lbs | 6332 kg | 15,970 lbs (Optional) | 7243 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH MX215 Magnum use?
The hydraulic system is listed as PFC with 38.6 gpm | 146.1 lpm | 58 gpm (Optional) | 219.5 lpm total hydraulic flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH MX215 Magnum hydraulics?
For service planning, the oil-volume figure is 45.5 gal | 172.2 L, the system is listed as PFC, and flow is listed at 38.6 gpm. Because this is a larger system, buying oil short or draining without checking the manual gets expensive fast.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
