The Massey Ferguson 680 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 15.9 gpm | 60.2 lpm, and hydraulic pressure is 3046 psi | 210.0 bar.
about 28.3 hydraulic hp from listed pressure and pump flow
Massey Ferguson 680 Hydraulic Comparison Charts
Pump flow comparison
This model
15.9 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
3,046 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
9,921 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 680 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 680, but pump flow is 15.9 gpm | 60.2 lpm, pressure is 3046 psi | 210.0 bar, and lift is listed as 9921 lbs | 4500 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 680 hydraulics feel fast or slow?
The useful speed clue is 15.9 gpm | 60.2 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the Massey Ferguson 680 hydraulic pressure tell you?
The pressure spec is 3046 psi | 210.0 bar, above the 2,600 psi benchmark. That gives the system stronger force potential, but the implement, hoses, couplers and relief settings still have to match.
What matters most for loader speed on the Massey Ferguson 680?
On the Massey Ferguson 680, 15.9 gpm | 60.2 lpm pump flow points to quicker loader and cylinder movement, 3,046 psi pressure affects force more than speed, and 9,921 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 680?
For implement matching, the useful checks are 15.9 gpm flow, 3,046 psi pressure, 9,921 lb listed lift, and II hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, strong on hydraulic force if the cylinders and relief settings match, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 680 rear lift capacity strong?
The listed lift figure is 9921 lbs | 4500 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Will the Massey Ferguson 680 hydraulics handle long hydraulic jobs?
The useful heat clues are 15.9 gpm flow, 3,046 psi pressure, and about 28.3 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 680 make on paper?
Using 3,046 psi and 15.9 gpm, the rough pressure-flow estimate is about 28.3 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 680 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is position and draft control, and listed lift is 9921 lbs | 4500 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What should you check before servicing the Massey Ferguson 680 hydraulics?
For service planning, pressure is listed at 3,046 psi and flow is listed at 15.9 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
