The New Holland TS125A tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 19.8 gpm (open center) | 74.9 lpm, hydraulic pressure is 3046 psi | 210.0 bar, and hydraulic type is open center.
New Holland TS125A Hydraulic Capacity & Flow Specs
| Hydraulic type | open center |
|---|---|
| Hydraulic pressure | 3046 psi | 210.0 bar |
| Pump flow | 19.8 gpm (open center) | 74.9 lpm |
| Steering flow | 10.5 gpm | 39.7 lpm |
| Rear remotes | 2 to 4 |
New Holland TS125A Hitch, Remote & Lift Specs
| Rear hitch type | II |
|---|---|
| Rear hitch control | mechanical lower-link draft sensing |
| Rear lift at 24 inches | 9285 lbs | 4211 kg |
New Holland TS125A Useful Hydraulic Calculations
| Steering flow vs pump flow | 53% of listed pump flow |
|---|---|
| Rear lift per pump gpm | 468.9 lb per gpm |
| Estimated hydraulic horsepower | about 35.2 hydraulic hp from listed pressure and pump flow |
New Holland TS125A Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TS125A Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
| Differential lock | electro-hydraulic rear |
New Holland TS125A Hydraulic Capacity FAQ
Why is the New Holland TS125A hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TS125A, but pump flow is 19.8 gpm (open center) | 74.9 lpm, pressure is 3046 psi | 210.0 bar, system type is open center, and lift is listed as 9285 lbs | 4211 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TS125A hydraulics feel fast or slow?
The useful speed clue is 19.8 gpm (open center) | 74.9 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the New Holland TS125A hydraulic pressure tell you?
The pressure spec is 3046 psi | 210.0 bar, above the 2,600 psi benchmark. That gives the system stronger force potential, but the implement, hoses, couplers and relief settings still have to match.
What matters most for loader speed on the New Holland TS125A?
On the New Holland TS125A, 19.8 gpm (open center) | 74.9 lpm pump flow points to quicker loader and cylinder movement, 3,046 psi pressure affects force more than speed, and 9,285 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TS125A?
For implement matching, the useful checks are 19.8 gpm flow, 3,046 psi pressure, 9,285 lb listed lift, and 2 to 4 remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, strong on hydraulic force if the cylinders and relief settings match, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TS125A rear lift capacity strong?
The listed lift figure is 9285 lbs | 4211 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the New Holland TS125A hydraulic remotes enough?
The New Holland TS125A remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland TS125A hydraulics handle long hydraulic jobs?
The useful heat clues are 19.8 gpm flow, 3,046 psi pressure, and about 35.2 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland TS125A make on paper?
Using 3,046 psi and 19.8 gpm, the rough pressure-flow estimate is about 35.2 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the New Holland TS125A hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is mechanical lower-link draft sensing, and listed lift is 9285 lbs | 4211 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
