The John Deere 4500 coolant capacity is 1.8 gal (6.8 L). The listed coolant is John Deere Cool-Gard II, with The recommended coolant for a John Deere 4500 tractor is John Deere Cool-Gard II, which guidance.
Coolant capacity1.8 gal (6.8 L)Cooling system refill amount
Antifreeze mixThe recommended coolant for a John Deere 4500 tractor is John Deere Cool-Gard II, whichFreeze/boil protection
John Deere 4500 Coolant Capacity Specs
Coolant capacity
1.8 gal (6.8 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant for a John Deere 4500 tractor is John Deere Cool-Gard II, which
Engine horsepower
39 hp
Engine displacement
122 cu in (2 L)
John Deere 4500 Coolant Capacity Guide
Coolant capacity guide
This model
1.8 gal
Class low
1.5 gal
Class typical
3.5 gal
Class high
6 gal
Compared with a broad compact tractor guide, not the full tractor dataset.
John Deere 4500 Coolant Service Notes
Coolant capacity note
The John Deere 4500 cooling system is listed at 1.8 gal (6.8 L). Final level can settle after the first heat cycle, so recheck the level after service
Coolant service note
Use 1.8 gal (6.8 L) as the refill amount for the John Deere 4500, but do not mix coolant types blindly. The listed coolant detail is John Deere Cool-Gard II and The recommended coolant for a John Deere 4500 tractor is John Deere Cool-Gard II, which
Coolant type note
The listed coolant type for the John Deere 4500 is John Deere Cool-Gard II. Match the coolant chemistry before topping up or flushing the system
Antifreeze mix note
The listed antifreeze mix for the John Deere 4500 is The recommended coolant for a John Deere 4500 tractor is John Deere Cool-Gard II, which. Mix ratio affects freeze protection, boil protection and corrosion control
Refill check
When refilling the John Deere 4500, do not pour in 1.8 gal (6.8 L) and walk away. Fill slowly, run the engine, let it cool and recheck the level
Engine context
For comparison, the John Deere 4500 engine details listed here are engine horsepower 39 hp and engine displacement 122 cu in (2 L). The coolant capacity remains the service number to use for refilling
John Deere 4500 Coolant Capacity FAQ
What is the refill amount for the John Deere 4500 cooling system?
A full coolant refill on the John Deere 4500 is listed at 1.8 gal (6.8 L). Fill slowly and allow for a small top-up after the first heat cycle
What should I match when topping up coolant in the John Deere 4500?
The John Deere 4500 coolant listing shows John Deere Cool-Gard II. Use the operator manual and coolant label to confirm compatibility
How should coolant concentrate be mixed for the John Deere 4500?
For the John Deere 4500, the coolant mix is listed as The recommended coolant for a John Deere 4500 tractor is John Deere Cool-Gard II, which. Do not dilute the system with too much plain water
Should I run the John Deere 4500 after adding coolant?
Check the John Deere 4500 coolant level cold after service. Hot coolant is pressurized and dangerous, so let the system cool before opening the cap
When is a full coolant flush better than a top-up on the John Deere 4500?
If coolant condition is good, topping up may be enough. If it is old or contaminated, a full drain and refill is safer for the John Deere 4500
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
