The Case IH Maxxum 110 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 16.6 gpm | 62.8 lpm, hydraulic type is open center, and valves/remotes are listed as 2 to 4.
Case IH Maxxum 110 Hydraulic Capacity & Flow Specs
| Hydraulic type | open center |
|---|---|
| Pump flow | 16.6 gpm | 62.8 lpm |
| Total hydraulic flow | 27.1 gpm | 102.6 lpm |
| Steering flow | 10.5 gpm | 39.7 lpm |
| Hydraulic valves | 2 to 4 |
Case IH Maxxum 110 Hitch, Remote & Lift Specs
| Rear hitch type | 2 |
|---|---|
| Rear hitch control | mechanical draft control |
| Rear lift | 7,509 lbs | 3406 kg | 8,813 lbs (Optional) | 3997 kg |
| Front lift | 8157 lbs | 3700 kg |
Case IH Maxxum 110 Useful Hydraulic Calculations
| Total flow vs pump flow | 163.3% of listed pump flow |
|---|---|
| Steering flow vs pump flow | 63.3% of listed pump flow |
| Rear lift per pump gpm | 452.3 lb per gpm |
Case IH Maxxum 110 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Maxxum 110 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
| Trailer brakes | hydraulic Optional |
Case IH Maxxum 110 Hydraulic Capacity FAQ
Why is the Case IH Maxxum 110 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Maxxum 110, but pump flow is 16.6 gpm | 62.8 lpm, system type is open center, and lift is listed as 7,509 lbs | 3406 kg | 8,813 lbs (Optional) | 3997 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Maxxum 110 hydraulics feel fast or slow?
The useful speed clue is 16.6 gpm | 62.8 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the Case IH Maxxum 110?
On the Case IH Maxxum 110, 16.6 gpm | 62.8 lpm pump flow points to quicker loader and cylinder movement and 7,509 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Maxxum 110?
For implement matching, the useful checks are 16.6 gpm flow, 7,509 lb listed lift, 2 to 4 remote/valve listing, and 2 hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Maxxum 110 rear lift capacity strong?
The listed lift figure is 7,509 lbs | 3406 kg | 8,813 lbs (Optional) | 3997 kg, close to the 7,000 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the Case IH Maxxum 110 hydraulic remotes enough?
The Case IH Maxxum 110 remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Maxxum 110 hydraulics handle long hydraulic jobs?
The useful heat clues are 16.6 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Case IH Maxxum 110 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is 2, hitch control is mechanical draft control, and listed lift is 7,509 lbs | 3406 kg | 8,813 lbs (Optional) | 3997 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH Maxxum 110 use?
The hydraulic system is listed as open center with 16.6 gpm | 62.8 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Maxxum 110 hydraulics?
For service planning, the system is listed as open center and flow is listed at 16.6 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
