The New Holland T6020 Delta tractor hydraulic capacity is 17.1 gal | 64.7 L, pump flow is 16.6 gpm | 62.8 lpm, and hydraulic type is open center.
Hydraulic Capacity17.1 gal | 64.7 L
Hydraulic Flow16.6 gpm | 62.8 lpm
Hydraulic Typeopen center
Valves / Remotes2 or 3
Lift Capacity7509 lbs | 3406 kg | 8813 lbs (Optional) | 3997 kg
New Holland T6020 Delta Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Hydraulic capacity
17.1 gal | 64.7 L
Pump flow
16.6 gpm | 62.8 lpm
Total hydraulic flow
27.1 gpm | 102.6 lpm
Steering flow
10.5 gpm | 39.7 lpm
Hydraulic valves
2 or 3
New Holland T6020 Delta Hitch, Remote & Lift Specs
Rear hitch type
II
Rear hitch control
mechanical lower-link draft control
Rear lift
7509 lbs | 3406 kg | 8813 lbs (Optional) | 3997 kg
New Holland T6020 Delta Useful Hydraulic Calculations
Pump flow per gallon of hydraulic capacity
1 gpm per gal
Hydraulic tank turnover estimate
about 1 minutes at rated pump flow
Total flow vs pump flow
163.3% of listed pump flow
Steering flow vs pump flow
63.3% of listed pump flow
Rear lift per pump gpm
452.3 lb per gpm
Rear lift per hydraulic gallon
439.1 lb per gal
Metric capacity vs pump flow
64.7 L capacity with 16.6 gpm pump flow
New Holland T6020 Delta Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
17.1 gal
Average
18 gal
Low
8 gal
High
32 gal
Pump flow comparison
This model
16.6 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Rear lift comparison
This model
7,509 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland T6020 Delta Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power
Brakes
Hydraulic wet disc brakes
New Holland T6020 Delta Hydraulic Capacity FAQ
Is the New Holland T6020 Delta hydraulic capacity big or small for its size?
The New Holland T6020 Delta lists 17.1 gal | 64.7 L of hydraulic capacity, which is close to the 18 gal benchmark for this group. It is a normal-sized hydraulic oil volume for this tractor class, so the bigger performance clues are flow, pressure and lift.
Will the New Holland T6020 Delta hydraulics feel fast or slow?
The useful speed clue is 16.6 gpm | 62.8 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the New Holland T6020 Delta?
On the New Holland T6020 Delta, 16.6 gpm | 62.8 lpm pump flow points to quicker loader and cylinder movement and 7,509 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland T6020 Delta?
For implement matching, the useful checks are 16.6 gpm flow, 7,509 lb listed lift, 2 or 3 remote/valve listing, and II hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland T6020 Delta rear lift capacity strong?
The listed lift figure is 7509 lbs | 3406 kg | 8813 lbs (Optional) | 3997 kg, close to the 7,000 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the New Holland T6020 Delta hydraulic remotes enough?
The New Holland T6020 Delta remote/valve listing is 2 or 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland T6020 Delta hydraulics handle long hydraulic jobs?
The useful heat clues are 17.1 gal of hydraulic capacity and 16.6 gpm flow. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
What do the New Holland T6020 Delta hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is mechanical lower-link draft control, and listed lift is 7509 lbs | 3406 kg | 8813 lbs (Optional) | 3997 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland T6020 Delta use?
The hydraulic system is listed as open center with 16.6 gpm | 62.8 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland T6020 Delta hydraulics?
For service planning, the oil-volume figure is 17.1 gal | 64.7 L, the system is listed as open center, and flow is listed at 16.6 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
