The Case IH Magnum 275 tractor hydraulic capacity is 45.5 gal | 172.2 L, pump flow is 44 gpm | 166.5 lpm | 59 gpm (Optional) | 223.3 lpm, and hydraulic type is PFC.
Case IH Magnum 275 Hydraulic Capacity & Flow Specs
| Hydraulic type | PFC |
|---|---|
| Hydraulic capacity | 45.5 gal | 172.2 L |
| Total hydraulic flow | 44 gpm | 166.5 lpm | 59 gpm (Optional) | 223.3 lpm |
| Hydraulic valves | 3 to 5 |
Case IH Magnum 275 Hitch, Remote & Lift Specs
| Rear hitch type | III/IIIN |
|---|---|
| Rear lift | 14070 lbs | 6382 kg |
Case IH Magnum 275 Useful Hydraulic Calculations
| Rear lift per hydraulic gallon | 309.2 lb per gal |
|---|
Case IH Magnum 275 Hydraulic Comparison Charts
Hydraulic capacity comparison
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Magnum 275 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | hydraulic wet disc brakes |
Case IH Magnum 275 Extra Hydraulic Notes
| Total flow | 44 gpm | 166.5 lpm |
|---|
Case IH Magnum 275 Hydraulic Capacity FAQ
Is the Case IH Magnum 275 hydraulic capacity big or small for its size?
The Case IH Magnum 275 lists 45.5 gal | 172.2 L of hydraulic capacity, which is close to the 42 gal benchmark for this group. It is a normal-sized hydraulic oil volume for this tractor class, so the bigger performance clues are flow, pressure and lift.
Will the Case IH Magnum 275 hydraulics feel fast or slow?
The useful speed clue is 44 gpm | 166.5 lpm | 59 gpm (Optional) | 223.3 lpm total hydraulic flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Case IH Magnum 275?
On the Case IH Magnum 275, 44 gpm | 166.5 lpm | 59 gpm (Optional) | 223.3 lpm total hydraulic flow points to slower loader and cylinder movement and 14,070 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Magnum 275?
For implement matching, the useful checks are 44 gpm flow, 14,070 lb listed lift, 3 to 5 remote/valve listing, and III/IIIN hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Magnum 275 rear lift capacity strong?
The listed lift figure is 14070 lbs | 6382 kg, close to the 15,500 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the Case IH Magnum 275 hydraulic remotes enough?
The Case IH Magnum 275 remote/valve listing is 3 to 5. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Magnum 275 hydraulics handle long hydraulic jobs?
The useful heat clues are 45.5 gal of hydraulic capacity and 44 gpm flow. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
What do the Case IH Magnum 275 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III/IIIN and listed lift is 14070 lbs | 6382 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH Magnum 275 use?
The hydraulic system is listed as PFC with 44 gpm | 166.5 lpm | 59 gpm (Optional) | 223.3 lpm total hydraulic flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Magnum 275 hydraulics?
For service planning, the oil-volume figure is 45.5 gal | 172.2 L, the system is listed as PFC, and flow is listed at 44 gpm. Because this is a larger system, buying oil short or draining without checking the manual gets expensive fast.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
