The Case IH Farmall 140A tractor engine horsepower is 140 hp | 104.4 kW, PTO horsepower is 115 hp | 85.8 kW, and the drawbar horsepower is 103.64 hp | 77.3 kW.
Engine HP140 hp | 104.4 kW
PTO HP115 hp | 85.8 kW
Drawbar HP103.64 hp | 77.3 kW
PTO Transfer82.1%
Displacement411 ci | 6.7 L
Case IH Farmall 140A Horsepower Specs
Engine gross horsepower
140 hp | 104.4 kW
PTO horsepower claimed
115 hp | 85.8 kW
PTO horsepower tested
126.47 hp | 94.3 kW
Drawbar horsepower tested
103.64 hp | 77.3 kW
Case IH Farmall 140A Useful Horsepower Calculations
PTO-to-engine power transfer
82.1% of engine hp reaches the PTO
Drawbar-to-engine power transfer
74% of engine hp reaches the drawbar
Drawbar-to-PTO power ratio
90.1% drawbar hp vs PTO hp
Engine size per PTO horsepower
3.6 ci per PTO hp
PTO horsepower per liter
17.2 PTO hp per L
Engine size per engine horsepower
2.9 ci per engine hp
Engine horsepower per liter
20.9 engine hp per L
Fuel tank per PTO horsepower
0.5 gal per PTO hp
Rated speed per PTO horsepower
19.1 rpm per PTO hp
Case IH Farmall 140A Engine Specs
Engine model
year
Engine type
turbocharged diesel
Displacement
411 ci | 6.7 L
Bore and stroke
4.094×5.197 inches | 104 x 132 mm
Compression
17.5:1
Rated RPM
2200
Case IH Farmall 140A Fuel, Cooling, Starting & Service Specs
Fuel capacity
62 gal | 234.7 L
Starter volts
12
Battery volts
12
Case IH Farmall 140A Horsepower Comparison Charts
Engine horsepower comparison
This model
140 hp
Average
210 hp
Low
120 hp
High
380 hp
PTO horsepower comparison
This model
115 hp
Average
175 hp
Low
100 hp
High
320 hp
Drawbar horsepower comparison
This model
103.6 hp
Average
150 hp
Low
85 hp
High
280 hp
Displacement comparison
This model
411 ci
Average
520 ci
Low
360 ci
High
750 ci
Rated RPM comparison
This model
2,200 rpm
Average
2,100 rpm
Low
1,600 rpm
High
2,500 rpm
Engine size per PTO HP
This model
3.6 ci/hp
Average
3.3 ci/hp
Low
2 ci/hp
High
5.2 ci/hp
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH Farmall 140A Horsepower FAQ
How much horsepower does the Case IH Farmall 140A have?
The listed engine output is 140 hp, below the 210 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 140 hp.
How much PTO horsepower does the Case IH Farmall 140A have?
The listed PTO output is 115 hp, below the 175 hp benchmark average. For real use, size PTO implements below or near 115 hp rather than using a bigger engine-horsepower number.
How much drawbar horsepower does the Case IH Farmall 140A have?
The listed drawbar output is 103.6 hp, below the 150 hp benchmark average. For pulling work, the safer assumption is about 103.6 hp at the drawbar before soil, ballast and tire limits are considered.
How much engine power reaches the PTO on the Case IH Farmall 140A?
The PTO-to-engine transfer works out to 82.1%, from 140 engine hp to 115 PTO hp. That is a normal usable range for judging PTO implement fit.
How efficient is the Case IH Farmall 140A for pulling work?
The drawbar-to-engine transfer is about 74%, from 140 engine hp to 103.6 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.
Is the Case IH Farmall 140A better judged by PTO hp or drawbar hp?
The drawbar output is about 90.1% of PTO output, comparing 103.6 drawbar hp with 115 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Case IH Farmall 140A engine?
The engine displacement is 411 ci, below the 520 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Case IH Farmall 140A engine stressed for its PTO horsepower?
The engine has about 3.6 cubic inches per PTO hp, using 411 ci and 115 PTO hp. That is close to the normal benchmark for this category.
How much PTO horsepower per liter does the Case IH Farmall 140A make?
The output density is about 17.2 PTO hp per liter, using 115 PTO hp and 6.7 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
