The Case IH Maxxum 140 tractor engine horsepower is 139 hp | 103.7 kW, PTO horsepower is 120 hp | 89.5 kW, and the drawbar horsepower is 107.4 hp | 80.1 kW.
Engine HP139 hp | 103.7 kW
PTO HP120 hp | 89.5 kW
Drawbar HP107.4 hp | 80.1 kW
PTO Transfer86.3%
Torque452 lb-ft | 612.9 Nm
Displacement410.6 ci | 6.7 L
Case IH Maxxum 140 Horsepower Specs
Engine gross horsepower
139 hp | 103.7 kW
PTO horsepower claimed
120 hp | 89.5 kW
PTO horsepower tested
140.3 hp | 104.6 kW
Drawbar horsepower tested
107.4 hp | 80.1 kW
Case IH Maxxum 140 Useful Horsepower Calculations
PTO-to-engine power transfer
86.3% of engine hp reaches the PTO
Drawbar-to-engine power transfer
77.3% of engine hp reaches the drawbar
Drawbar-to-PTO power ratio
89.5% drawbar hp vs PTO hp
Engine size per PTO horsepower
3.4 ci per PTO hp
PTO horsepower per liter
17.9 PTO hp per L
Engine size per engine horsepower
3 ci per engine hp
Engine horsepower per liter
20.7 engine hp per L
Torque per PTO horsepower
3.8 lb-ft per PTO hp
Rated speed per PTO horsepower
18.3 rpm per PTO hp
Case IH Maxxum 140 Engine Specs
Engine model
year
Engine type
turbocharged aftercooled diesel
Displacement
410.6 ci | 6.7 L
Bore and stroke
4.094×5.197 inches | 104 x 132 mm
Compression
17.5:1
Emissions
Tier 3
Rated RPM
2200
Torque
452 lb-ft | 612.9 Nm
Torque RPM
1250
Case IH Maxxum 140 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Starter power
5.6 hp | 4.2 kW
Battery volts
12
Firing order
1-5-3-6-2-4
Case IH Maxxum 140 Horsepower Comparison Charts
Engine horsepower comparison
This model
139 hp
Average
210 hp
Low
120 hp
High
380 hp
PTO horsepower comparison
This model
120 hp
Average
175 hp
Low
100 hp
High
320 hp
Drawbar horsepower comparison
This model
107.4 hp
Average
150 hp
Low
85 hp
High
280 hp
Displacement comparison
This model
410.6 ci
Average
520 ci
Low
360 ci
High
750 ci
Torque comparison
This model
452 lb-ft
Average
700 lb-ft
Low
350 lb-ft
High
1,250 lb-ft
Rated RPM comparison
This model
2,200 rpm
Average
2,100 rpm
Low
1,600 rpm
High
2,500 rpm
Engine size per PTO HP
This model
3.4 ci/hp
Average
3.3 ci/hp
Low
2 ci/hp
High
5.2 ci/hp
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH Maxxum 140 Horsepower FAQ
How much horsepower does the Case IH Maxxum 140 have?
The listed engine output is 139 hp, below the 210 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 139 hp.
How much PTO horsepower does the Case IH Maxxum 140 have?
The listed PTO output is 120 hp, below the 175 hp benchmark average. For real use, size PTO implements below or near 120 hp rather than using a bigger engine-horsepower number.
How much drawbar horsepower does the Case IH Maxxum 140 have?
The listed drawbar output is 107.4 hp, below the 150 hp benchmark average. For pulling work, the safer assumption is about 107.4 hp at the drawbar before soil, ballast and tire limits are considered.
How much engine power reaches the PTO on the Case IH Maxxum 140?
The PTO-to-engine transfer works out to 86.3%, from 139 engine hp to 120 PTO hp. That is a normal usable range for judging PTO implement fit.
How efficient is the Case IH Maxxum 140 for pulling work?
The drawbar-to-engine transfer is about 77.3%, from 139 engine hp to 107.4 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.
Is the Case IH Maxxum 140 better judged by PTO hp or drawbar hp?
The drawbar output is about 89.5% of PTO output, comparing 107.4 drawbar hp with 120 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Case IH Maxxum 140 engine?
The engine displacement is 410.6 ci, below the 520 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Case IH Maxxum 140 engine stressed for its PTO horsepower?
The engine has about 3.4 cubic inches per PTO hp, using 410.6 ci and 120 PTO hp. That is close to the normal benchmark for this category.
How much PTO horsepower per liter does the Case IH Maxxum 140 make?
The output density is about 17.9 PTO hp per liter, using 120 PTO hp and 6.7 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
