The Case IH Farmall DX18E tractor engine horsepower is 18 hp | 13.4 kW, and PTO horsepower is 13.7 hp | 10.2 kW.
Case IH Farmall DX18E Horsepower Specs
| Engine gross horsepower | 18 hp | 13.4 kW |
|---|---|
| PTO horsepower claimed | 13.7 hp | 10.2 kW |
Case IH Farmall DX18E Useful Horsepower Calculations
| PTO-to-engine power transfer | 76.1% of engine hp reaches the PTO |
|---|---|
| Engine size per PTO horsepower | 4.2 ci per PTO hp |
| PTO horsepower per liter | 13.7 PTO hp per L |
| Engine size per engine horsepower | 3.2 ci per engine hp |
| Engine horsepower per liter | 18 engine hp per L |
| Rated speed per PTO horsepower | 219 rpm per PTO hp |
Case IH Farmall DX18E Engine Specs
| Displacement | 58.2 ci | 1.0 L |
|---|---|
| Bore and stroke | 2.953×2.835 inches | 75 x 72 mm |
| Compression | 24:1 |
| Rated RPM | 3000 |
Case IH Farmall DX18E Fuel, Cooling, Starting & Service Specs
| Starter volts | 12 |
|---|---|
| Battery volts | 12 |
| Firing order | 1-2-3 |
| Idle RPM | 1380-3200 |
Case IH Farmall DX18E Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Displacement comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH Farmall DX18E Horsepower FAQ
How much horsepower does the Case IH Farmall DX18E have?
The listed engine output is 18 hp, below the 35 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 18 hp.
How much PTO horsepower does the Case IH Farmall DX18E have?
The listed PTO output is 13.7 hp, below the 28 hp benchmark average. For real use, size PTO implements below or near 13.7 hp rather than using a bigger engine-horsepower number.
How much engine power reaches the PTO on the Case IH Farmall DX18E?
The PTO-to-engine transfer works out to 76.1%, from 18 engine hp to 13.7 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Case IH Farmall DX18E engine?
The engine displacement is 58.2 ci, below the 110 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Case IH Farmall DX18E engine stressed for its PTO horsepower?
The engine has about 4.2 cubic inches per PTO hp, using 58.2 ci and 13.7 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the Case IH Farmall DX18E make?
The output density is about 13.7 PTO hp per liter, using 13.7 PTO hp and 1 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
What rpm is the Case IH Farmall DX18E rated at?
The rated speed is 3,000 rpm, above the 2,400 rpm benchmark average. A higher 3,000 rpm rating can make power well but may feel busier under load.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
