The Case IH Farmall 110C tractor engine horsepower is 107 hp | 79.8 kW, PTO horsepower is 93 hp | 69.4 kW, and the drawbar horsepower is 73.4 hp | 54.7 kW.
Case IH Farmall 110C Horsepower Specs
| Engine gross horsepower | 107 hp | 79.8 kW |
|---|---|
| PTO horsepower claimed | 93 hp | 69.4 kW |
| PTO horsepower tested | 96.0 hp | 71.6 kW |
| Drawbar horsepower tested | 73.4 hp | 54.7 kW |
Case IH Farmall 110C Useful Horsepower Calculations
| PTO-to-engine power transfer | 86.9% of engine hp reaches the PTO |
|---|---|
| Drawbar-to-engine power transfer | 68.6% of engine hp reaches the drawbar |
| Drawbar-to-PTO power ratio | 78.9% drawbar hp vs PTO hp |
| Engine size per PTO horsepower | 2.2 ci per PTO hp |
| PTO horsepower per liter | 27.4 PTO hp per L |
| Engine size per engine horsepower | 1.9 ci per engine hp |
| Engine horsepower per liter | 31.5 engine hp per L |
Case IH Farmall 110C Engine Specs
| Engine model | year |
|---|---|
| Engine type | wastegate turbocharged and aftercooled diesel |
| Displacement | 206.7 ci | 3.4 L |
| Bore and stroke | 3.90×4.33 inches | 99 x 110 mm |
Case IH Farmall 110C Fuel, Cooling, Starting & Service Specs
| Starter volts | 12 |
|---|---|
| Battery volts | 12 |
Case IH Farmall 110C Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Drawbar horsepower comparison
Displacement comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH Farmall 110C Horsepower FAQ
How much horsepower does the Case IH Farmall 110C have?
The listed engine output is 107 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 107 hp.
How much PTO horsepower does the Case IH Farmall 110C have?
The listed PTO output is 93 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 93 hp.
How much drawbar horsepower does the Case IH Farmall 110C have?
The listed drawbar output is 73.4 hp, above the 55 hp benchmark average. That makes the 73.4 hp drawbar number more useful than engine hp for tillage and heavy pulling.
How much engine power reaches the PTO on the Case IH Farmall 110C?
The PTO-to-engine transfer works out to 86.9%, from 107 engine hp to 93 PTO hp. That is a normal usable range for judging PTO implement fit.
How efficient is the Case IH Farmall 110C for pulling work?
The drawbar-to-engine transfer is about 68.6%, from 107 engine hp to 73.4 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.
Is the Case IH Farmall 110C better judged by PTO hp or drawbar hp?
The drawbar output is about 78.9% of PTO output, comparing 73.4 drawbar hp with 93 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Case IH Farmall 110C engine?
The engine displacement is 206.7 ci, below the 260 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Case IH Farmall 110C engine stressed for its PTO horsepower?
The engine has about 2.2 cubic inches per PTO hp, using 206.7 ci and 93 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Case IH Farmall 110C make?
The output density is about 27.4 PTO hp per liter, using 93 PTO hp and 3.4 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
