The Case IH Farmall 110C tractor primary air filter part number is 381423R92. The inner safety filter is 381423R92.
Case IH Farmall 110C Air Filter Details
Primary air filter part number
381423R92
Inner safety air filter part number
381423R92
Outer air filter part number
Same as primary air filter
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
400 hrs
Light use
800 hrs
These are practical inspection/replacement guide ranges for the row-crop tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
Case IH Farmall 110C Extra Air Filter Notes
Engine model
FPT 3.4L
Engine displacement
3.4 L | 207.5 cu in
Engine horsepower
107 hp | 79.8 kW
Primary filter note
For the Case IH Farmall 110C, the listed primary air filter part number is 381423R92. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Outer filter note
The outer air filter for the Case IH Farmall 110C appears to be the same listed item as the primary filter.
Safety filter note
The listed inner safety air filter is 381423R92. Do not remove the safety element for normal cleaning; replace it if dirty, damaged or oil-soaked.
Fitment note
Check the old filter, air cleaner housing label and parts book before ordering if the tractor has had an engine or intake-housing change.
Power range note
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Engine airflow note
The displacement helps identify the engine family; horsepower tells you how hard it breathes under load. The element still has to match the canister.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
Case IH Farmall 110C Air Filter FAQs
Is the Case IH Farmall 110C air filter a one-part or multi-part service?
For normal service, the primary/outer element is the one that does the dirty work. The inner safety element is backup protection, so replace it less often and keep it seated while cleaning the housing.
How do I avoid buying the wrong Case IH Farmall 110C air filter?
Treat 381423R92 as the hero value, not the whole truth. Serial range, engine swaps and different air-cleaner housings can beat a generic online listing.
How can part-number style help check a Case IH Farmall 110C filter?
If a listing shows a shortened version of 381423R92, be suspicious. Air filters are fitment parts, not close-enough parts.
Why are there multiple air filter numbers for the Case IH Farmall 110C?
For this setup, think of primary and outer as the dirty-work element. The inner safety element is not part of every quick service.
Why not stretch a dirty Case IH Farmall 110C air filter under load?
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
When should the Case IH Farmall 110C safety element be replaced?
Replace the safety element when it is contaminated, damaged, wet or due by the book. Blowing it out as a normal habit is a dumb way to push dirt toward the engine.
Can a Case IH Farmall 110C engine swap change the air filter?
The engine family, displacement and power class help explain why the filter matters, but they do not prove fit. The air-cleaner canister and old element are still the authority.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official caseih.com website before ordering or installing an air filter.
