The blade measurement captured is width 3 in (76 mm) and thickness 0.25 in (6 mm). The deck uses 2 blades.
Blade sizewidth 3 in (76 mm) and thickness 0.25 in (6 mm)
Blade count2 blades
Kubota G2000 Mower Blade Size and Part Numbers
Blade width
3 in (76 mm)
Blade thickness
0.25 in (6 mm)
Number of blades
2 blades
Blade type
high-lift, mulching, standard, and bagging
Blade Size Comparison Chart
Blade width comparison
This model
3 in
Average
2.5 in
Low
2 in
High
3.5 in
Blade thickness comparison
This model
0.25 in
Average
0.25 in
Low
0.188 in
High
0.312 in
Kubota G2000 Blade Notes
Blade note
The Kubota G2000 blade listing captured here shows width 3 in (76 mm) and thickness 0.25 in (6 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering
Deck note
For the Kubota G2000, the captured deck information is blade count 2 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups
Blade type note
The blade type captured for the Kubota G2000 is high-lift, mulching, standard, and bagging. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck
Fitment note
Before ordering Kubota G2000 blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong
Kubota G2000 Mower Blade FAQ
Should you buy Kubota G2000 blades by length only?
No. The blade width found is 3 in (76 mm). That is a normal mower blade width range. Width affects airflow, lift and clipping movement under the deck. Use length, width, center hole and OEM part number together where possible
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official kubotausa.com before ordering replacement blades.
