The John Deere X147R mower blade part number found is GX21785. The blade set part number found is GX24567. The blade measurement captured is length 18.5 in (470 mm). The deck uses 2 blades.
John Deere X147R Mower Blade Size and Part Numbers
| Mower blade part number | GX21785 |
|---|---|
| Mower blade set part number | GX24567 |
| Blade length | 18.5 in (470 mm) |
| Number of blades | 2 blades |
| Blade type | high-lift, mulching, and bagging |
Blade Size Comparison Chart
Blade length comparison
John Deere X147R Blade Notes
| Blade note | The John Deere X147R blade listing captured here shows single blade part number GX21785, blade set part number GX24567, and length 18.5 in (470 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the John Deere X147R, the captured deck information is blade count 2 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the John Deere X147R is high-lift, mulching, and bagging. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | The blunt rule with the John Deere X147R: part number and center hole beat guesswork. A blade can be the right length and still be wrong |
John Deere X147R Mower Blade FAQ
What should you check when fitting a 18.5 in (470 mm) blade on the John Deere X147R?
A 18.5 in (470 mm) blade needs the right center hole, lift style and deck clearance. That is a common lawn tractor blade length range, but it still needs the right center hole, sail/lift shape and deck fitment. Spin the blade by hand after fitting to confirm it clears the deck
What is the difference between the John Deere X147R blade number and blade set number?
The captured single blade number is GX21785, while the captured blade set number is GX24567. Use the single blade number for one replacement and the set number when replacing the full deck set
Can you swap John Deere X147R blade types?
The blade type captured is high-lift, mulching, and bagging. You can often choose a different style only if it fits the same deck and spindle setup. Use 18.5 in (470 mm) as the fitment starting point
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
