The John Deere X155R mower blade part number found is M131453. The blade set part number found is AM147289. The blade measurement captured is thickness 0.25 in (6 mm).
Blade part #M131453
Blade set part #AM147289
Blade sizethickness 0.25 in (6 mm)
John Deere X155R Mower Blade Size and Part Numbers
Mower blade part number
M131453
Mower blade set part number
AM147289
Blade thickness
0.25 in (6 mm)
Blade type
high-lift and mulching
Blade Size Comparison Chart
Blade thickness comparison
This model
0.25 in
Average
0.25 in
Low
0.188 in
High
0.312 in
John Deere X155R Blade Notes
Blade note
The John Deere X155R blade listing captured here shows single blade part number M131453, blade set part number AM147289, and thickness 0.25 in (6 mm). Use this as a buying guide, then match the blade position, deck size and center-hole style before spending money
Blade type note
The John Deere X155R blade style captured here is high-lift and mulching. Blade type affects airflow and clipping handling, not just cut width
Fitment note
Blades are cheap until you buy the wrong set twice. On the John Deere X155R, confirm part number, deck size and blade count before buying
John Deere X155R Mower Blade FAQ
Should you buy one John Deere X155R blade or a full set?
The single blade number captured is M131453, and the set number captured is AM147289. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Which blade type should you use on the John Deere X155R?
The blade type captured is high-lift and mulching. Use that against the captured fitment value M131453. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Is the captured John Deere X155R blade part number enough to buy from?
The captured blade part number is M131453. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
