The John Deere LX277 mower blade part number found is M144202. The blade measurement captured is thickness 0.25 in (6 mm) and center hole 1 in (25 mm). The deck uses 3 blades.
Blade part #M144202
Blade sizethickness 0.25 in (6 mm) and center hole 1 in (25 mm)
Blade count3 blades
John Deere LX277 Mower Blade Size and Part Numbers
Mower blade part number
M144202
Blade thickness
0.25 in (6 mm)
Blade center hole size
1 in (25 mm)
Number of blades
3 blades
Blade type
high-lift, mulching, and bagging
Blade Size Comparison Chart
Blade thickness comparison
This model
0.25 in
Average
0.25 in
Low
0.188 in
High
0.312 in
John Deere LX277 Blade Notes
Blade note
The John Deere LX277 blade listing captured here shows single blade part number M144202 and thickness 0.25 in (6 mm) and center hole 1 in (25 mm). Do not buy purely from model name if the mower deck or serial range is different
Deck note
For the John Deere LX277, the captured deck information is blade count 3 blades. Deck size matters because the same model family can use different blade kits
Blade type note
For the John Deere LX277, blade type is listed as high-lift, mulching, and bagging. Pick the blade style for the job: clean discharge, bagging lift, or mulching
Fitment note
For the John Deere LX277, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or old blade before ordering
John Deere LX277 Mower Blade FAQ
Can you modify a John Deere LX277 blade center hole to fit?
Do not do that. The captured center-hole detail is 1 in (25 mm). Grinding or drilling a mower blade can ruin balance and create vibration
Which blade type should you use on the John Deere LX277?
The blade type captured is high-lift, mulching, and bagging. Use that against the captured fitment value M144202. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
