The John Deere L130 mower blade part number found is AM133201. The blade set part number found is GX20434. The blade measurement captured is thickness 0.25 in (6 mm). The deck uses 2 blades.
Blade part #AM133201
Blade set part #GX20434
Blade sizethickness 0.25 in (6 mm)
Blade count2 blades
John Deere L130 Mower Blade Size and Part Numbers
Mower blade part number
AM133201
Mower blade set part number
GX20434
Blade thickness
0.25 in (6 mm)
Number of blades
2 blades
Blade type
high-lift, mulching, bagging, and 3-in-1
Blade Size Comparison Chart
Blade thickness comparison
This model
0.25 in
Average
0.25 in
Low
0.188 in
High
0.312 in
John Deere L130 Blade Notes
Blade note
The John Deere L130 blade listing captured here shows single blade part number AM133201, blade set part number GX20434, and thickness 0.25 in (6 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering
Deck note
For the John Deere L130, the captured deck information is blade count 2 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups
Blade type note
The blade type captured for the John Deere L130 is high-lift, mulching, bagging, and 3-in-1. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck
Fitment note
For the John Deere L130, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or old blade before ordering
John Deere L130 Mower Blade FAQ
Should you buy one John Deere L130 blade or a full set?
The single blade number captured is AM133201, and the set number captured is GX20434. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Can you swap John Deere L130 blade types?
The blade type captured is high-lift, mulching, bagging, and 3-in-1. You can often choose a different style only if it fits the same deck and spindle setup. Use AM133201 as the fitment starting point
What should you double-check with the John Deere L130 blade part number?
The captured blade part number is AM133201. Because the physical blade measurements are missing here, check the old blade stamp, deck tag or official parts diagram before ordering
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
