The John Deere 110 mower blade part number found is AM137327. The blade set part number found is M41237. The blade measurement captured is thickness 0.375 in (10 mm) and center hole star / 0.38 in (10 mm). The deck uses 2 blades.
John Deere 110 Mower Blade Size and Part Numbers
| Mower blade part number | AM137327 |
|---|---|
| Mower blade set part number | M41237 |
| Blade thickness | 0.375 in (10 mm) |
| Blade center hole size | star / 0.38 in (10 mm) |
| Number of blades | 2 blades |
| Blade type | high-lift, mulching, standard, and bagging |
Blade Size Comparison Chart
Blade thickness comparison
John Deere 110 Blade Notes
| Blade note | The John Deere 110 blade listing captured here shows single blade part number AM137327, blade set part number M41237, and thickness 0.375 in (10 mm) and center hole star / 0.38 in (10 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the John Deere 110, the captured deck information is blade count 2 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the John Deere 110 is high-lift, mulching, standard, and bagging. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | The blunt rule with the John Deere 110: part number and center hole beat guesswork. A blade can be the right length and still be wrong |
John Deere 110 Mower Blade FAQ
Why does the John Deere 110 blade center hole matter?
The captured center-hole detail is star / 0.38 in (10 mm). If the hole shape or size is wrong, the blade may not seat correctly on the spindle even if the length looks right
What is the difference between the John Deere 110 blade number and blade set number?
The captured single blade number is AM137327, while the captured blade set number is M41237. Use the single blade number for one replacement and the set number when replacing the full deck set
Which blade type should you use on the John Deere 110?
The blade type captured is high-lift, mulching, standard, and bagging. Use that against the captured fitment value AM137327. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
