The John Deere 111 mower blade part numbers found are GX20249 and GX20433. The blade set part numbers found are GX20249 and GY20679. The blade measurement captured is thickness 0.188 in (5 mm). The deck uses 2 blades.
Blade part #GX20249 and GX20433
Blade set part #GX20249 and GY20679
Blade sizethickness 0.188 in (5 mm)
Blade count2 blades
John Deere 111 Mower Blade Size and Part Numbers
Mower blade part number
GX20249 and GX20433
Mower blade set part number
GX20249 and GY20679
Blade thickness
0.188 in (5 mm)
Number of blades
2 blades
Blade Size Comparison Chart
Blade thickness comparison
This model
0.188 in
Average
0.188 in
Low
0.125 in
High
0.25 in
John Deere 111 Blade Notes
Blade note
The John Deere 111 blade listing captured here shows single blade part numbers GX20249 and GX20433, blade set part numbers GX20249 and GY20679, and thickness 0.188 in (5 mm). Do not buy purely from model name if the mower deck or serial range is different
Deck note
For the John Deere 111, the captured deck information is blade count 2 blades. Deck size matters because the same model family can use different blade kits
Fitment note
Before ordering John Deere 111 blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong
John Deere 111 Mower Blade FAQ
Should you buy one John Deere 111 blade or a full set?
The single blade number captured is GX20249 and GX20433, and the set number captured is GX20249 and GY20679. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Is the captured John Deere 111 blade part numbers enough to buy from?
The captured blade part numbers is GX20249 and GX20433. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
