The Kubota M7040 coolant capacity is listed as 1.65 gal (6.2 L). It also lists antifreeze mix 50/50 coolant and water mix.
Coolant capacity1.65 gal (6.2 L)
Antifreeze mix50/50 coolant and water mix
Kubota M7040 Coolant Capacity
Coolant capacity
1.65 gal (6.2 L)
Cooling system capacity
1.65 gal (6.2 L)
Radiator capacity
1.65 gal (6.2 L)
Antifreeze mix
50/50 coolant and water mix
Engine model
V3307-DI
Engine displacement
3.3 L (203.5 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
1.65 gal
Average
2 gal
Low
1 gal
High
4 gal
Engine displacement comparison
This model
3.3 L
Average
3.5 L
Low
1.8 L
High
6 L
Kubota M7040 Coolant and Engine Notes
Coolant capacity note
For the Kubota M7040, 1.65 gal (6.2 L) is the main coolant capacity captured. Use it as a refill planning number, then confirm the final level at the machine
Radiator capacity note
The Kubota M7040 radiator figure is 1.65 gal (6.2 L). Treat it as radiator context, not always the complete refill amount
Antifreeze mix note
The Kubota M7040 antifreeze mix is listed as 50/50 coolant and water mix. That is the normal protection range for freezing, boiling and corrosion control
Engine context note
For the Kubota M7040, the supporting engine specs are engine model V3307-DI and displacement 3.3 L (203.5 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual
Refill note
For a coolant change on the Kubota M7040, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed
Kubota M7040 Coolant Capacity FAQ
How much coolant does the Kubota M7040 take?
The main coolant amount captured for the Kubota M7040 is 1.65 gal (6.2 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Kubota M7040?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Kubota M7040, the captured coolant type is the coolant type specified in the manual.
What antifreeze mix does the Kubota M7040 use?
The captured antifreeze mix for the Kubota M7040 is 50/50 coolant and water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Kubota M7040 coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
What engine specs affect Kubota M7040 coolant capacity?
The captured engine context is engine model V3307-DI and displacement 3.3 L (203.5 cu in). Engine size is one reason coolant capacity changes between tractors.
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
