The Kubota M7040 has a 3-point hitch lift capacity of 3,307 lb (1,500 kg) at 24 inches behind the link ends. It also lists hitch category Category 2 / Category 1, hydraulic pump flow 11 gpm (41.6 L/min), and operating weight 6,000 lb (2,722 kg).
Best rear lift figure3,307 lb (1,500 kg)
Lift at 24 inches3,307 lb (1,500 kg)
Hitch categoryCategory 2 / Category 1
Operating weight6,000 lb (2,722 kg)
Kubota M7040 3-Point Hitch Lift Capacity
3-point hitch lift capacity
4,189 lb (1,900 kg)
Lift capacity at 24 inches behind link ends
3,307 lb (1,500 kg)
Hitch category
Category 2 / Category 1
Hydraulic pump flow
11 gpm (41.6 L/min)
Operating weight
6,000 lb (2,722 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
3,307 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
3,307 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
11 gpm
Average
15 gpm
Low
8 gpm
High
25 gpm
Operating weight comparison
This model
6,000 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota M7040 Hitch and Rear Lift Notes
Rear lift capacity note
For the Kubota M7040, 3,307 lb (1,500 kg) is the headline rear-lift capacity captured. This matters for ballast boxes, tillers, blades, mowers and other mounted implements
24-inch lift note
The 24-inch lift figure is usually the more useful number because rear implements hang behind the lift arms, not directly on them
Hitch category note
The Kubota M7040 hitch category is listed as Category 2 / Category 1. This matters because rear implements need to match the tractor’s hitch pin size and geometry
Hydraulic flow note
Hydraulic pump flow is listed as 11 gpm (41.6 L/min). That is useful context for hydraulic response and some rear or auxiliary hydraulic functions
Operating weight note
For the Kubota M7040, operating weight is 6,000 lb (2,722 kg). Use that beside rear lift capacity before hanging a heavy implement out the back
Rear implement matching
Use the Kubota M7040’s hitch capacity as a filter before shopping for rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box
Kubota M7040 3-Point Hitch FAQ
What is the Kubota M7040 3-point hitch lift capacity?
The Kubota M7040 is listed with 3,307 lb (1,500 kg) for lift at 24 inches behind the link ends. That makes it a utility rear-lift tractor, so it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments.
What does the Kubota M7040 24-inch lift capacity mean?
It means the Kubota M7040 is rated to lift 3,307 lb (1,500 kg) with the load measured 24 inches behind the link ends. That is usually closer to real implement use than a hitch-end-only number.
Can the Kubota M7040 use any rear implement?
No. Start with the Category 2 / Category 1 hitch category, then check implement weight against the 3,307 lb (1,500 kg) rating at 24 inches behind the link ends.
What rear implements can the Kubota M7040 lift?
Use the 3,307 lb (1,500 kg) rating at 24 inches behind the link ends as the first filter for implements such as rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box. Also check hitch category Category 2 / Category 1 and operating weight 6,000 lb (2,722 kg) before choosing the implement.
Do hydraulic flow and weight matter for the Kubota M7040?
Yes. The Kubota M7040 lists hydraulic pump flow of 11 gpm (41.6 L/min) and operating weight of 6,000 lb (2,722 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
