The Kubota M7060 coolant capacity is listed as 2.17 gal (8.2 L). It also lists coolant type ethylene glycol-based coolant and antifreeze mix 50/50 coolant and water mix.
Coolant capacity2.17 gal (8.2 L)
Coolant typeethylene glycol-based coolant
Antifreeze mix50/50 coolant and water mix
Kubota M7060 Coolant Capacity
Coolant capacity
2.17 gal (8.2 L)
Cooling system capacity
2.17 gal (8.2 L)
Coolant type
ethylene glycol-based coolant
Antifreeze mix
50/50 coolant and water mix
Engine model
V3307-CR-TE4
Engine horsepower
71 hp (52.9 kW)
Engine displacement
3.3 L (201.4 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
2.17 gal
Average
2 gal
Low
1 gal
High
4 gal
Engine horsepower comparison
This model
71 hp
Average
75 hp
Low
40 hp
High
125 hp
Engine displacement comparison
This model
3.3 L
Average
3.5 L
Low
1.8 L
High
6 L
Kubota M7060 Coolant and Engine Notes
Coolant capacity note
For service planning, the Kubota M7060 should be treated as 2.17 gal (8.2 L) coolant capacity. That is a compact tractor cooling system where a normal premixed coolant jug may cover most of the refill
Coolant type note
Use the right coolant formula for the Kubota M7060: ethylene glycol-based coolant. Cheap wrong coolant is not a smart saving if it causes corrosion or deposits
Antifreeze mix note
The 50/50 coolant and water mix mix gives the Kubota M7060 coolant system a sensible balance of freeze protection, boil protection and corrosion protection
Engine context note
The Kubota M7060 engine data captured here is engine model V3307-CR-TE4, engine horsepower 71 hp (52.9 kW), and displacement 3.3 L (201.4 cu in). Bigger engines usually need more coolant and more careful refill bleeding
Refill note
Coolant changes are simple but easy to do sloppily. On the Kubota M7060, plan around 2.17 gal (8.2 L) and confirm the final level after air works out of the system
Kubota M7060 Coolant Capacity FAQ
What is the Kubota M7060 coolant capacity?
The Kubota M7060 coolant capacity is listed as 2.17 gal (8.2 L) for coolant capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Kubota M7060?
No. Use ethylene glycol-based coolant or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Kubota M7060?
Premixed coolant can be fine if it matches ethylene glycol-based coolant and the required mix. The captured mix for the Kubota M7060 is 50/50 coolant and water mix.
How often should I change coolant in the Kubota M7060?
The captured coolant change interval for the Kubota M7060 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
Why does the Kubota M7060 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota M7060, the supporting engine data is engine model V3307-CR-TE4, horsepower 71 hp (52.9 kW), and displacement 3.3 L (201.4 cu in).
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
