The Kubota L5060 has a 3-point hitch lift capacity of 2,976 lb (1,350 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 9.4 gpm (35.6 L/min), and operating weight 3,979 lb (1,805 kg).
Best rear lift figure2,976 lb (1,350 kg)
Lift at 24 inches2,976 lb (1,350 kg)
Hitch categoryCategory 1
Operating weight3,979 lb (1,805 kg)
Kubota L5060 3-Point Hitch Lift Capacity
3-point hitch lift capacity
3,200 lb (1,451 kg)
Lift capacity at 24 inches behind link ends
2,976 lb (1,350 kg)
Hitch category
Category 1
Hitch control type
position control
Hydraulic pump flow
9.4 gpm (35.6 L/min)
Operating weight
3,979 lb (1,805 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,976 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
2,976 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
9.4 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
3,979 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota L5060 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota L5060 rear hitch spec points to 2,976 lb (1,350 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota L5060, start with Category 1, then check lift capacity and tractor stability
Hitch control note
The Kubota L5060’s hitch-control field is shown as position control. Use it as a soft reference, not a headline specification
Hydraulic flow note
The 9.4 gpm (35.6 L/min) hydraulic flow figure helps round out the Kubota L5060’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Operating weight note
The 3,979 lb (1,805 kg) operating weight gives context for the Kubota L5060’s hitch lift capacity. Rear ballast and tire setup can still change the real-world feel
Rear implement matching
The practical reason to check rear lift on the Kubota L5060 is implement fit. Think rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box, then compare actual implement weight
Kubota L5060 3-Point Hitch FAQ
How much can the Kubota L5060 rear 3-point hitch lift?
The main rear-lift number captured for the Kubota L5060 is 2,976 lb (1,350 kg). Use that as the first-pass number for rear implements, not as a front-loader rating.
Why does the 24-inch rear lift spec matter?
The 2,976 lb (1,350 kg) rating matters because mounted implements put weight behind the lift arms. That extra distance makes the tractor work harder than a close-in hitch-end test.
What hitch category is the Kubota L5060?
The listed hitch category for the Kubota L5060 is Category 1. Match implement pins and hitch width to that category before worrying about lift capacity.
Can the Kubota L5060 handle heavy rear attachments?
The Kubota L5060’s useful lift reference is 2,976 lb (1,350 kg). It may suit rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box, but match implements carefully, especially if the attachment is long or carries weight far behind the hitch.
Do hydraulic flow and weight matter for the Kubota L5060?
Yes. The Kubota L5060 lists hydraulic pump flow of 9.4 gpm (35.6 L/min) and operating weight of 3,979 lb (1,805 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
