Quick answer:
The Kubota MX4800 tractor battery specs found are 12 V (verify with operator manual), 800 CCA.
Voltage12 V (verify with operator manual)
CCA800 CCA
Kubota MX4800 Battery Specs
| Battery voltage | 12 V (verify with operator manual) |
|---|---|
| Battery CCA | 800 CCA |
Battery Spec Benchmarks
CCA benchmark
Voltage benchmark
Benchmarks are general reference ranges for utility tractor batteries.
Kubota MX4800 Battery FAQ
| Replacement battery recommendation | For the Kubota MX4800 tractor, use a battery that matches 800 CCA or higher. Also match the terminal layout, hold-down style and battery tray clearance before buying. A 12 V battery is shown as a fallback, so verify the voltage in the operator manual before ordering. |
|---|---|
| Battery voltage shown | The battery voltage shown for the Kubota MX4800 tractor is 12 V (verify with operator manual). This was filled because the page had other battery specs but no clear voltage answer. |
| Battery CCA found | The battery CCA figure found for the Kubota MX4800 tractor is 800 CCA. |
| Battery replacement steps | If the Kubota MX4800 uses the listed 12 V (verify with operator manual), 800 CCA, keep the replacement as close to those figures as possible. Remove the key, isolate the negative cable first, then remove the positive cable. Once the new battery is installed squarely in the tray, attach positive first and negative last. |
| Bad battery symptoms | A tired battery in the Kubota MX4800 often acts like an electrical problem: clicking at the key, lights dropping low, starter hesitation or the tractor starting one day and refusing the next. |
Official information note
Mistakes do happen. Check the operator manual, service manual and official kubotausa.com website for official battery specifications before buying parts.






