The Kubota MX4800 coolant capacity is listed as 13.5 gal (51.1 L). It also lists coolant type ethylene glycol-based coolant and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota MX4800 Coolant Capacity
| Coolant capacity | 13.5 gal (51.1 L) |
|---|---|
| Coolant type | ethylene glycol-based coolant and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Coolant change interval | every 2 years and every 2,000 hours |
| Engine horsepower | 49.3 hp (36.8 kW) |
| Engine displacement | 2.4 L (146.5 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota MX4800 Coolant and Engine Notes
| Coolant capacity note | The Kubota MX4800 coolant spec points to 13.5 gal (51.1 L). Do not rely on the radiator-only amount if the full cooling-system capacity is available |
|---|---|
| Coolant type note | For the Kubota MX4800, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant and ASTM D3306 compatible |
| Antifreeze mix note | The 50/50 coolant and water mix mix gives the Kubota MX4800 coolant system a sensible balance of freeze protection, boil protection and corrosion protection |
| Coolant change interval note | The captured coolant change interval for the Kubota MX4800 is every 2 years and every 2,000 hours. Old coolant can lose corrosion protection even if the tractor still runs cool |
| Engine context note | The Kubota MX4800 engine data captured here is engine horsepower 49.3 hp (36.8 kW) and displacement 2.4 L (146.5 cu in). Bigger engines usually need more coolant and more careful refill bleeding |
| Refill note | The practical service move for the Kubota MX4800: buy enough coolant for 13.5 gal (51.1 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling |
Kubota MX4800 Coolant Capacity FAQ
How much coolant does the Kubota MX4800 take?
The main coolant amount captured for the Kubota MX4800 is 13.5 gal (51.1 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Kubota MX4800?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Kubota MX4800, the captured coolant type is ethylene glycol-based coolant and ASTM D3306 compatible.
What antifreeze mix does the Kubota MX4800 use?
The captured antifreeze mix for the Kubota MX4800 is 50/50 coolant and water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Kubota MX4800 coolant be replaced?
Use every 2 years and every 2,000 hours as the service guide. Coolant can look okay but still lose corrosion protection over time.
What engine specs affect Kubota MX4800 coolant capacity?
The captured engine context is horsepower 49.3 hp (36.8 kW) and displacement 2.4 L (146.5 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
