Kubota MD77 Tractor Dimensions, Length, Width & Height

Quick answer:

The Kubota MD77 tractor is 90.6 in long and 54.3 in wide.

Length90.6 in (7 ft 6.6 in) / 2,301.2 mm
Width54.3 in (4 ft 6.3 in) / 1,379.2 mm

Kubota MD77 Dimensions

Overall length 90.6 in (7 ft 6.6 in) / 2,301.2 mm
Overall width 54.3 in (4 ft 6.3 in) / 1,379.2 mm
Rear tread width 56.7 in (4 ft 8.7 in) / 1,440.2 mm

Tractor Size Comparison Chart

Overall length comparison

This model

90.6 in

Average

105 in

Low

70 in

High

140 in

Overall width comparison

This model

54.3 in

Average

48 in

Low

34 in

High

66 in

Kubota MD77 Extra Dimension Notes

Size class note The Kubota MD77 is firmly a small compact tractor based on its listed measurements. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Storage fit note The Kubota MD77 can be treated as a tighter-storage tractor. With length 90.6 in (7 ft 6.6 in) / 2,301.2 mm and width 54.3 in (4 ft 6.3 in) / 1,379.2 mm, check ROPS/cab height and loader length.
Fitment note The Kubota MD77 dimension figures are length at 90.6 in (7 ft 6.6 in) / 2,301.2 mm and width at 54.3 in (4 ft 6.3 in) / 1,379.2 mm. Match these against shed height, gate width and trailer length.
Tread width note The Kubota MD77 rear tread figure is 56.7 in (4 ft 8.7 in) / 1,440.2 mm. This is useful, but not the full wheel-stance picture.

Storage Tips

  • Compact size helps, but a loader or mower can still make the parked footprint much bigger.

Storage FAQ

What size garage will fit the tractor?

For storage fit, the useful question is whether the space clears height not captured height, 54.3 in width and 90.6 in length with margin. Around 8 ft wide and 15 ft deep is the no-drama check.

What size door should I check?

A bare fit only says the tractor can squeeze through. For normal use, the Kubota MD77’s height not captured height and 54.3 in width point to about the tractor height plus clearance high and 8 ft wide, with 15 ft depth.

Do attachments change the storage size?

Yes. If the bay only clears the listed 90.6 in length, it is too short once attachments stay on. Use about 15 ft bare, then add attachment length.

How much maneuvering room should I allow?

If an attachment stays on, base the turning room on the attached length, not just the captured 90.6 in tractor length.

Official information note

Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.