The Kubota MD77 has a 3-point hitch lift capacity of 2,650 lb (1,202 kg) at 24 inches behind the link ends. It also lists hitch category Category 1 / Category 2, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 5,699 lb (2,585 kg).
Best rear lift figure2,650 lb (1,202 kg)
Lift at 24 inches2,650 lb (1,202 kg)
Hitch categoryCategory 1 / Category 2
Operating weight5,699 lb (2,585 kg)
Kubota MD77 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,200 lb (998 kg)
Lift capacity at 24 inches behind link ends
2,650 lb (1,202 kg)
Hitch category
Category 1 / Category 2
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
5,699 lb (2,585 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,650 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
2,650 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
5,699 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota MD77 Hitch and Rear Lift Notes
Rear lift capacity note
For the Kubota MD77, 2,650 lb (1,202 kg) is the headline rear-lift capacity captured. This matters for ballast boxes, tillers, blades, mowers and other mounted implements
24-inch lift note
The 24-inch lift figure is usually the more useful number because rear implements hang behind the lift arms, not directly on them
Hitch category note
The Kubota MD77 hitch category is listed as Category 1 / Category 2. This matters because rear implements need to match the tractor’s hitch pin size and geometry
Hydraulic flow note
The 8.2 gpm (31 L/min) hydraulic flow figure helps round out the Kubota MD77’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Operating weight note
The 5,699 lb (2,585 kg) operating weight gives context for the Kubota MD77’s hitch lift capacity. Rear ballast and tire setup can still change the real-world feel
Rear implement matching
Use the Kubota MD77’s hitch capacity as a filter before shopping for rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box
Kubota MD77 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota MD77?
Rear lift capacity for the Kubota MD77 is shown as 2,650 lb (1,202 kg) for lift at 24 inches behind the link ends. For real attachment matching, match implements carefully, especially if the attachment is long or carries weight far behind the hitch.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota MD77 is listed at 2,650 lb (1,202 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota MD77?
Yes. The Kubota MD77 is listed as Category 1 / Category 2, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota MD77?
Start with 2,650 lb (1,202 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Is lift capacity enough to size implements for the Kubota MD77?
No. The Kubota MD77 may list 2,650 lb (1,202 kg) of rear lift, but the 5,699 lb (2,585 kg) operating weight and 8.2 gpm (31 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
