The Kubota M5270 tractor is 82.7 in long, with a 82.7 in wheelbase.
Length82.7 in (6 ft 10.7 in) / 2,100.6 mm
Wheelbase82.7 in (6 ft 10.7 in) / 2,100.6 mm
Ground clearance15.4 in (1 ft 3.4 in) / 391.2 mm
Kubota M5270 Dimensions
Overall length
82.7 in (6 ft 10.7 in) / 2,100.6 mm
Wheelbase
82.7 in (6 ft 10.7 in) / 2,100.6 mm
Ground clearance
15.4 in (1 ft 3.4 in) / 391.2 mm
Tractor Size Comparison Chart
Overall length comparison
This model
82.7 in
Average
105 in
Low
70 in
High
140 in
Wheelbase comparison
This model
82.7 in
Average
58 in
Low
42 in
High
74 in
Ground clearance comparison
This model
15.4 in
Average
9 in
Low
5 in
High
14 in
Kubota M5270 Extra Dimension Notes
Size class note
From a storage and access point of view, the Kubota M5270 behaves like a small compact tractor. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Storage fit note
Storage-wise, the Kubota M5270 should be checked against the real bay size. With length 82.7 in (6 ft 10.7 in) / 2,100.6 mm, do not rely on class alone.
Fitment note
The Kubota M5270 is best judged by length at 82.7 in (6 ft 10.7 in) / 2,100.6 mm. The biggest issue is usually width or height, not just floor length.
Wheelbase note
The Kubota M5270 gives a wheelbase figure of 82.7 in (6 ft 10.7 in) / 2,100.6 mm. That helps describe the tractor’s stance.
Ground clearance note
The Kubota M5270 ground clearance spec is 15.4 in (1 ft 3.4 in) / 391.2 mm. It helps decide how forgiving the tractor is on uneven ground.
Storage Tips
Do not assume storage fit until the real doorway and attachment setup are checked.
Leave walking room around the parked tractor if you need to service, refuel or connect implements indoors.
This is a smaller tractor class, so tight acreage sheds and small equipment bays are realistic if the doorway clears.
Use the 82.7 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
What size garage will fit the tractor?
With height not captured height and width not captured width, the doorway is the first limit; with 82.7 in length, bay depth is the second. Start with 15 ft deep, not the bare dimensions.
What size door should I check?
Use 15 ft deep as the door-and-bay target. That is based on the tractor’s height not captured height, width not captured width and 82.7 in length, plus working clearance.
Do attachments change the storage size?
Yes. If the bay only clears the listed 82.7 in length, it is too short once attachments stay on. Use about 15 ft bare, then add attachment length.
How much maneuvering room should I allow?
The 82.7 in length needs bay depth, but the 82.7 in wheelbase needs lineup room. Treat about 12 ft outside the shed as the practical approach zone.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.
