The Kubota M5270 has a 3-point hitch lift capacity of 2,980 lb (1,352 kg) at 24 inches behind the link ends. It also lists hitch category Category 2 / Category 1, hydraulic pump flow 12.5 gpm (47.3 L/min), and operating weight 5,688 lb (2,580 kg).
Best rear lift figure2,980 lb (1,352 kg)
Lift at 24 inches2,980 lb (1,352 kg)
Hitch categoryCategory 2 / Category 1
Operating weight5,688 lb (2,580 kg)
Kubota M5270 3-Point Hitch Lift Capacity
3-point hitch lift capacity
3,300 lb (1,497 kg)
Lift capacity at 24 inches behind link ends
2,980 lb (1,352 kg)
Hitch category
Category 2 / Category 1
Hydraulic pump flow
12.5 gpm (47.3 L/min)
Operating weight
5,688 lb (2,580 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,980 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
2,980 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
12.5 gpm
Average
15 gpm
Low
8 gpm
High
25 gpm
Operating weight comparison
This model
5,688 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota M5270 Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota M5270 is 2,980 lb (1,352 kg) (lift at 24 inches behind the link ends). In plain terms, it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments
24-inch lift note
For the Kubota M5270, the 2,980 lb (1,352 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hydraulic flow note
The 12.5 gpm (47.3 L/min) hydraulic flow figure helps round out the Kubota M5270’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Operating weight note
The 5,688 lb (2,580 kg) operating weight gives context for the Kubota M5270’s hitch lift capacity. Rear ballast and tire setup can still change the real-world feel
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota M5270’s lift capacity against gear like rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box
Kubota M5270 3-Point Hitch FAQ
What is the Kubota M5270 3-point hitch lift capacity?
The Kubota M5270 is listed with 2,980 lb (1,352 kg) for lift at 24 inches behind the link ends. That makes it a utility rear-lift tractor, so it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments.
What does the Kubota M5270 24-inch lift capacity mean?
It means the Kubota M5270 is rated to lift 2,980 lb (1,352 kg) with the load measured 24 inches behind the link ends. That is usually closer to real implement use than a hitch-end-only number.
Can the Kubota M5270 use any rear implement?
No. Start with the Category 2 / Category 1 hitch category, then check implement weight against the 2,980 lb (1,352 kg) rating at 24 inches behind the link ends.
What rear implements can the Kubota M5270 lift?
Use the 2,980 lb (1,352 kg) rating at 24 inches behind the link ends as the first filter for implements such as rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box. Also check hitch category Category 2 / Category 1 and operating weight 5,688 lb (2,580 kg) before choosing the implement.
Is lift capacity enough to size implements for the Kubota M5270?
No. The Kubota M5270 may list 2,980 lb (1,352 kg) of rear lift, but the 5,688 lb (2,580 kg) operating weight and 12.5 gpm (47.3 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
