The Kubota GL-350 tractor is 137.6 in long, 57.5 in wide, and 78 in tall.
Length137.6 in (11 ft 5.6 in) / 3,495 mm
Width57.5 in (4 ft 9.5 in) / 1,460.5 mm
Height78 in (6 ft 6 in) / 1,981.2 mm
Ground clearance14.2 in (1 ft 2.2 in) / 360.7 mm
Kubota GL-350 Dimensions
Overall length
137.6 in (11 ft 5.6 in) / 3,495 mm
Overall width
57.5 in (4 ft 9.5 in) / 1,460.5 mm
Overall height
78 in (6 ft 6 in) / 1,981.2 mm
Ground clearance
14.2 in (1 ft 2.2 in) / 360.7 mm
Tractor Size Comparison Chart
Overall length comparison
This model
137.6 in
Average
125 in
Low
100 in
High
155 in
Overall width comparison
This model
57.5 in
Average
60 in
Low
45 in
High
78 in
Overall height comparison
This model
78 in
Average
89 in
Low
70 in
High
108 in
Ground clearance comparison
This model
14.2 in
Average
12 in
Low
8 in
High
17 in
Kubota GL-350 Extra Dimension Notes
Storage fit note
For shed fit, the Kubota GL-350 is not oversized. With length 137.6 in (11 ft 5.6 in) / 3,495 mm, width 57.5 in (4 ft 9.5 in) / 1,460.5 mm, and height 78 in (6 ft 6 in) / 1,981.2 mm, a good garage, carport or compact shed may be workable.
Fitment note
For the Kubota GL-350, length at 137.6 in (11 ft 5.6 in) / 3,495 mm, width at 57.5 in (4 ft 9.5 in) / 1,460.5 mm, and height at 78 in (6 ft 6 in) / 1,981.2 mm are the measurements that decide whether it is easy or annoying to store.
Ground clearance note
The Kubota GL-350 clearance spec reads 14.2 in (1 ft 2.2 in) / 360.7 mm. This affects how comfortably it can work over rows or uneven ground.
Storage Tips
For the Kubota GL-350, small-shed storage is realistic if the opening has usable margin, not just a perfect-on-paper fit.
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
Storage FAQ
What size garage will fit the tractor?
At 137.6 in long, 57.5 in wide, and 78 in tall, a garage may work only if the door and bay are bigger than the tractor, not just equal to it. Use about 8 ft high, 8 ft wide, and 15 ft deep before counting attachments.
What size door should I check?
The clean check is 8 ft high, 8 ft wide and 15 ft deep. That gives margin over the listed 78 in height, 57.5 in width and 137.6 in length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 78 in for overhead clearance, 57.5 in for side clearance and 137.6 in for bay depth.
How much maneuvering room should I allow?
If an attachment stays on, base the turning room on the attached length, not just the captured 137.6 in tractor length.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.
