The John Deere 6310SE holds 43.59 gal (165 L) of fuel. The listed fuel type is diesel; half a tank is 21.79 gal (82.5 L), and an empty-to-full refill needs about 9 x 5-gal cans.
Fuel tank capacity43.59 gal (165 L)Empty-to-full tank amount
Half tank21.79 gal (82.5 L)Planning guide
5-gal cansabout 9 x 5-gal cans to have enough fuel from emptyPortable fuel estimate
Fuel typedieselUse correct fuel
John Deere 6310SE fuel tank capacity specs
Fuel tank capacity
43.59 gal (165 L)
Fuel capacity in litres
165 L
Half tank amount
21.79 gal (82.5 L)
5-gallon fuel cans
about 9 x 5-gal cans to have enough fuel from empty
10-litre fuel jugs
17 x 10-L jugs
Fuel type
diesel
Estimated full tank fuel weight
309 lb (140 kg) of diesel
Engine horsepower
99 hp
Engine displacement
276 cu in (4.52 L)
Fuel capacity per horsepower
0.44 gal per hp
Fuel capacity is a tank-size figure. Actual top-up amount and runtime depend on remaining fuel, workload, throttle use, terrain and machine condition.
John Deere 6310SE fuel planning notes
Fuel capacity note
For the John Deere 6310SE, fuel tank capacity is 43.59 gal (165 L). This helps with fill-up planning, fuel storage and estimating how much fuel to bring to a job.
Refill planning
If carrying fuel to the John Deere 6310SE, budget about 9 x 5-gal cans or 17 x 10-L jugs for a full empty-to-full refill.
Fuel type note
Fuel type matters on the John Deere 6310SE. The listed type is diesel, so use the correct fuel before judging performance or runtime.
Full tank weight
A full tank on the John Deere 6310SE adds 309 lb (140 kg) of diesel. This is an estimate for fuel weight only, not total machine weight.
Engine context
For comparison, the John Deere 6310SE engine details listed here are engine horsepower 99 hp, engine displacement 276 cu in (4.52 L), and tank-to-power ratio 0.44 gal per hp. Tank size alone does not predict fuel use per hour.
Fuel tank capacity guide
This model
43.59 gal
Guide low
30 gal
Guide typical
55 gal
Guide high
90 gal
Compared with a broad 6 Series guide, not the full tractor dataset.
John Deere 6310SE fuel capacity FAQ
What fuel tank size is listed for the John Deere 6310SE?
For refueling, the John Deere 6310SE is listed at 43.59 gal (165 L). This is tank size, not a guaranteed runtime figure.
How many litres is the John Deere 6310SE fuel tank?
The John Deere 6310SE holds about 165 litres of fuel when filled from empty.
How many litres is half a tank on the John Deere 6310SE?
For the John Deere 6310SE, half of the listed fuel capacity is 21.79 gal (82.5 L). The actual gauge reading may not be perfectly linear.
How many 10-litre jugs fill the John Deere 6310SE?
For an empty-to-full refill on the John Deere 6310SE, plan for about 9 x 5-gal cans or 17 x 10-L jugs. Stop at the correct fill level rather than forcing extra fuel in.
Is the John Deere 6310SE diesel or gasoline?
The listed fuel type for the John Deere 6310SE is diesel. Match the correct fuel before filling the tank.
Can I calculate John Deere 6310SE fuel burn from tank size?
The John Deere 6310SE tank size is 43.59 gal (165 L), but runtime changes with workload. Fuel use is higher with tillage, heavy pulling, high hydraulic demand, PTO work or hard transport use than with light transport, low-load PTO work or easier field conditions.
Is the John Deere 6310SE fuel tank small or large?
The John Deere 6310SE has a utility-size tank at 43.59 gal (165 L). It is large enough that container count matters if you are refueling away from a pump.
Official information note
Mistakes do happen. Check the operator manual, service manual and official deere.com website for official fuel capacity specifications.
