The John Deere 6310SE takes 13 gal (49.2 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed For the John Deere 6310SE tractor, the recommended coolant is John Deere Cool-Gard II guidance.
Coolant capacity13 gal (49.2 L)Cooling system refill amount
Antifreeze mixFor the John Deere 6310SE tractor, the recommended coolant is John Deere Cool-Gard IIFreeze/boil protection
John Deere 6310SE Coolant Capacity Specs
Coolant capacity
13 gal (49.2 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
For the John Deere 6310SE tractor, the recommended coolant is John Deere Cool-Gard II
Engine horsepower
99 hp
Engine displacement
276 cu in (4.52 L)
John Deere 6310SE Coolant Capacity Guide
Coolant capacity guide
This model
13 gal
Class low
6 gal
Class typical
9.5 gal
Class high
14 gal
Compared with a broad 6 series guide, not the full tractor dataset.
John Deere 6310SE Coolant Service Notes
Coolant capacity note
The main coolant number for the John Deere 6310SE is 13 gal (49.2 L). Use it as the cooling-system refill amount, then check the radiator or overflow level after the engine has warmed up and cooled down
Coolant service note
The John Deere 6310SE cooling system should be refilled close to 13 gal (49.2 L), with coolant choice guided by John Deere Cool-Gard II and For the John Deere 6310SE tractor, the recommended coolant is John Deere Cool-Gard II
Coolant type note
Coolant type matters on the John Deere 6310SE. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear
Antifreeze mix note
For the John Deere 6310SE, the antifreeze mix is listed as For the John Deere 6310SE tractor, the recommended coolant is John Deere Cool-Gard II. Use the correct mix rather than topping up repeatedly with plain water
Refill check
Use the 13 gal (49.2 L) capacity to buy enough coolant for the John Deere 6310SE, but finish the job by checking the actual level marks
Engine context
For comparison, the John Deere 6310SE engine details listed here are engine horsepower 99 hp and engine displacement 276 cu in (4.52 L). The coolant capacity remains the service number to use for refilling
John Deere 6310SE Coolant Capacity FAQ
What is the full coolant refill capacity for the John Deere 6310SE?
Use 13 gal (49.2 L) as the coolant-change amount for the John Deere 6310SE. The final level should still be checked at the radiator or overflow bottle
What coolant should I put in the John Deere 6310SE?
Use coolant compatible with John Deere Cool-Gard II for the John Deere 6310SE. Capacity tells you how much; coolant type tells you what to use
What antifreeze ratio is listed for the John Deere 6310SE?
The listed antifreeze mix for the John Deere 6310SE is For the John Deere 6310SE tractor, the recommended coolant is John Deere Cool-Gard II. Use the correct mix for freeze, boil and corrosion protection
Should the John Deere 6310SE coolant be checked hot or cold?
The 13 gal (49.2 L) number helps you plan the refill. The actual finish point is the correct level mark after warm-up, cool-down and leak checking
What signs mean the John Deere 6310SE coolant should be flushed?
For the John Deere 6310SE, use the 13 gal (49.2 L) capacity when planning a full drain or flush. Topping up only solves low level, not worn-out coolant
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
