Coolant capacity for the John Deere 5130M is 9.51 gal (36 L). This is the main refill figure for a drain, flush or coolant change.
Coolant capacity9.51 gal (36 L)Cooling system refill amount
John Deere 5130M Coolant Capacity Specs
Coolant capacity
9.51 gal (36 L)
Engine horsepower
133.9 hp
Engine displacement
276 cu in (4.52 L)
John Deere 5130M Coolant Capacity Guide
Coolant capacity guide
This model
9.51 gal
Class low
4 gal
Class typical
6.5 gal
Class high
10 gal
Compared with a broad utility tractor guide, not the full tractor dataset.
John Deere 5130M Coolant Service Notes
Coolant capacity note
The John Deere 5130M coolant capacity is 9.51 gal (36 L). Treat it as a cooling-system amount, not a radiator-only top-up amount
Coolant service note
Use 9.51 gal (36 L) as the refill guide for the John Deere 5130M. The final level should still be confirmed at the radiator or overflow bottle
Refill check
Use the 9.51 gal (36 L) capacity to buy enough coolant for the John Deere 5130M, but finish the job by checking the actual level marks
Engine context
The engine context for the John Deere 5130M is engine horsepower 133.9 hp and engine displacement 276 cu in (4.52 L). Use this for comparison only; the refill amount is the coolant capacity above
John Deere 5130M Coolant Capacity FAQ
How much coolant is needed for a John Deere 5130M coolant change?
The John Deere 5130M takes 9.51 gal (36 L) of coolant. Final level can settle after trapped air leaves the cooling system
Should I bleed air after changing coolant in the John Deere 5130M?
After a coolant change on the John Deere 5130M, check for leaks, watch temperature and recheck the level once the engine cools down
When should I flush the John Deere 5130M cooling system?
Low level, bad smell, rust, sludge, oil film or overheating are signs to inspect the John Deere 5130M cooling system rather than only topping it up
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
