The John Deere 5130M tractor hydraulic pump flow is 18.4 GPM, and hydraulic system pressure is 3,000 psi.
Hydraulic pump flow18.4 GPM
Implement flow25.6 GPM
Total hydraulic flow24.8 GPM
Hydraulic pressure3,000 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity43.7 gal
John Deere 5130M Hydraulic Flow Details
Hydraulic pump flow
18.4 GPM
Implement hydraulic flow
25.6 GPM
Total hydraulic flow
24.8 GPM
Hydraulic system pressure
3,000 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
43.7 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
18.4 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
25.6 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
24.8 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
3,000 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
43.7 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 5130M Extra Hydraulic Notes
Hydraulic flow note
The John Deere 5130M’s implement flow figure is about 25.6 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
The John Deere 5130M’s hydraulic pressure is listed at 3,000 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (25.6 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 5130M: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
For maintenance, the John Deere 5130M’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
