For the John Deere 3005, coolant capacity is 1.25 gal (4.7 L). Coolant choice is listed as John Deere Cool-Gard II, with The recommended coolant for the John Deere 3005 tractor is John Deere Cool-Gard II, which guidance.
Coolant capacity1.25 gal (4.7 L)Cooling system refill amount
Antifreeze mixThe recommended coolant for the John Deere 3005 tractor is John Deere Cool-Gard II, whichFreeze/boil protection
John Deere 3005 Coolant Capacity Specs
Coolant capacity
1.25 gal (4.7 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant for the John Deere 3005 tractor is John Deere Cool-Gard II, which
Engine model
Yanmar 3TNV8
Engine horsepower
27.5 hp
Engine displacement
79.3 cu in (1.3 L)
John Deere 3005 Coolant Capacity Guide
Coolant capacity guide
This model
1.25 gal
Class low
1.5 gal
Class typical
3.5 gal
Class high
6 gal
Compared with a broad compact tractor guide, not the full tractor dataset.
John Deere 3005 Coolant Service Notes
Coolant capacity note
For the John Deere 3005, the coolant capacity is 1.25 gal (4.7 L). That is the buying and refill guide for a full cooling-system service
Coolant service note
For a full coolant service on the John Deere 3005, plan around 1.25 gal (4.7 L) and match the listed coolant guidance: John Deere Cool-Gard II and The recommended coolant for the John Deere 3005 tractor is John Deere Cool-Gard II, which
Coolant type note
The John Deere 3005 coolant type is John Deere Cool-Gard II. Wrong coolant chemistry can reduce corrosion, freeze and boil protection
Antifreeze mix note
The listed mix for the John Deere 3005 is The recommended coolant for the John Deere 3005 tractor is John Deere Cool-Gard II, which. Keep the coolant strength in range after a drain, flush or top-up
Refill check
After a drain and refill on the John Deere 3005, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
Engine context
The engine context for the John Deere 3005 is engine model Yanmar 3TNV8, engine horsepower 27.5 hp, and engine displacement 79.3 cu in (1.3 L). Use this for comparison only; the refill amount is the coolant capacity above
John Deere 3005 Coolant Capacity FAQ
How many litres of coolant does the John Deere 3005 take?
The cooling system capacity for the John Deere 3005 is 1.25 gal (4.7 L). This is the main refill figure for a drain, flush or coolant change
What coolant chemistry should the John Deere 3005 use?
For the John Deere 3005, the coolant type is listed as John Deere Cool-Gard II. Avoid mixing incompatible coolant products
What mix ratio should I use when refilling the John Deere 3005?
The listed antifreeze mix for the John Deere 3005 is The recommended coolant for the John Deere 3005 tractor is John Deere Cool-Gard II, which. Use the correct mix for freeze, boil and corrosion protection
How do I avoid air pockets when refilling the John Deere 3005 coolant?
Fill the John Deere 3005 slowly, run it with the heater/thermostat cycle where applicable, let it cool and check the level again. That helps catch trapped air
Should old coolant be drained from the John Deere 3005?
Flush the John Deere 3005 cooling system if the coolant is dirty, contaminated, badly diluted or overdue for service. A simple top-up does not fix old coolant chemistry
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
