The John Deere 3005 tractor primary engine air filter part number found is M131803. Cross-reference filters include WIX 49010; NAPA 49010; Baldwin PA2020; Donaldson P181052; more listed below. Filter dimensions found include Outer diameter: 2.25 in / 57 mm. Service guidance is to replace the air filter every 50 hours.
Primary air filterM131803
Cross-referenceWIX 49010
Filter sizeOuter diameter: 2.25 in / 57 mm
Engine power27.5 hp
Service intervalReplace every 50 hours
John Deere 3005 Air Filter Specs
Primary air filter part number
M131803
Secondary / safety air filter
AN403919
Pre-filter
M148207
Cross-reference filters
WIX 49010; NAPA 49010; Baldwin PA2020; Donaldson P181052; FRAM CA10180
Air filter size
Outer diameter: 2.25 in / 57 mm
Outer diameter
2.25 in / 57 mm
Replacement interval
Replace every 50 hours
Number of air filter elements
3 elements (primary, secondary, pre-filter)
Engine horsepower
27.5 hp
Engine displacement
79.3 cu in (1.3 L)
John Deere 3005 Air Filter Charts
Air filter dimensions
Outer diameter
2.25 in
Engine horsepower
This model
27.5 hp
Average
35 hp
Low
18 hp
High
66 hp
Engine displacement
This model
79.3 cu in
Average
100 cu in
Low
50 cu in
High
180 cu in
Air filter service interval
This model
50 hr
Average
100 hr
Low
50 hr
High
200 hr
John Deere 3005 Air Filter FAQ
What air filter does the John Deere 3005 use?
The primary engine air filter part number found for the John Deere 3005 is M131803.
What air filter cross-references fit the John Deere 3005?
Cross-reference filters found for the John Deere 3005 include WIX 49010; NAPA 49010; Baldwin PA2020; Donaldson P181052; FRAM CA10180.
Can I use an aftermarket air filter on the John Deere 3005?
The John Deere 3005 has 5 cross-reference filters listed, starting with WIX 49010. For aftermarket buying, compare brand part number, dimensions, seal shape and air-cleaner housing fit.
What size is the John Deere 3005 air filter?
The air filter dimensions found for the John Deere 3005 are Outer diameter: 2.25 in / 57 mm. Use these dimensions as a fit check, but treat the part number as the main match.
How often should the John Deere 3005 air filter be checked or replaced?
The service guidance found for the John Deere 3005 is to replace the air filter every 50 hours. That is shorter than the reference average of 100 hours for this class, so it points to more frequent inspection rather than a long replacement-only interval.
How many air filter elements are listed for the John Deere 3005?
This page lists a primary filter, a safety filter and a pre-filter: 3 elements (primary, secondary, pre-filter). Replace each only with the matching part number for that position.
Why include engine specs on a John Deere 3005 air filter page?
For the John Deere 3005, the engine specs found are 27.5 hp, 79.3 cu in (1.3 L). This is useful context when comparing similar models, but not a substitute for checking the filter number M131803.
Should I order the John Deere 3005 air filter by size or part number?
Use M131803 as the main match for the John Deere 3005. The cross-reference list helps find aftermarket options, while the measured dimensions helps avoid ordering a filter that does not seat correctly.
Official information note
Air filter fit can change by engine, serial number, production year and air-cleaner housing. Check the operator manual, parts manual and official deere.com website before buying or fitting an air filter.
