Coolant capacity for the John Deere 310C is 3.72 gal (14.1 L). The coolant type is listed as John Deere Cool-Gard II, and the antifreeze mix is 40/60 coolant and water mix.
John Deere 310C Coolant Capacity Specs
| Coolant capacity | 3.72 gal (14.1 L) |
|---|---|
| Coolant type | John Deere Cool-Gard II |
| Antifreeze mix | 40/60 coolant and water mix |
| Engine horsepower | 53.2 hp |
| Engine displacement | 2.7 L (164.8 cu in) |
John Deere 310C Coolant Capacity Guide
Coolant capacity guide
Compared with a broad older small tractor guide, not the full tractor dataset.
John Deere 310C Coolant Service Notes
| Coolant capacity note | For the John Deere 310C, the coolant capacity is 3.72 gal (14.1 L). That is the buying and refill guide for a full cooling-system service |
|---|---|
| Coolant service note | A proper coolant change on the John Deere 310C means using the 3.72 gal (14.1 L) capacity and keeping the coolant chemistry consistent with John Deere Cool-Gard II and 40/60 coolant and water mix |
| Coolant type note | For the John Deere 310C, coolant choice is listed as John Deere Cool-Gard II. Capacity tells you how much; coolant type tells you what to use |
| Antifreeze mix note | The John Deere 310C coolant mix guidance is 40/60 coolant and water mix. This matters most in freezing weather, hot work and long service intervals |
| Refill check | For the John Deere 310C, 3.72 gal (14.1 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system |
| Engine context | The engine context for the John Deere 310C is engine horsepower 53.2 hp and engine displacement 2.7 L (164.8 cu in). Use this for comparison only; the refill amount is the coolant capacity above |
John Deere 310C Coolant Capacity FAQ
What is the John Deere 310C coolant capacity?
For coolant service, the John Deere 310C is listed at 3.72 gal (14.1 L). Buy enough coolant for that amount and confirm the final level at the machine
Which coolant is listed for the John Deere 310C?
The listed coolant type for the John Deere 310C is John Deere Cool-Gard II. Match that coolant chemistry before topping up or flushing the system
Should I use premixed coolant in the John Deere 310C?
For the John Deere 310C, the coolant mix is listed as 40/60 coolant and water mix. Do not dilute the system with too much plain water
What should I check after refilling coolant in the John Deere 310C?
Do not judge the job only by pouring in 3.72 gal (14.1 L). The final check is the actual radiator or overflow level after the system has burped air
Is a coolant top-up enough before using the John Deere 310C?
Topping up is fine for a small low-level correction. If the coolant is old, rusty, oily, diluted or the wrong type, drain and flush the system using the 3.72 gal (14.1 L) capacity as the refill guide
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
