The John Deere 5050E has a 3-point hitch lift capacity of 3,192 lb (1,448 kg). It also lists hitch category Category 2 and rear PTO power 37 hp.
Best rear lift figure3,192 lb (1,448 kg)
Hitch categoryCategory 2
Rear PTO horsepower37 hp
John Deere 5050E 3-Point Hitch Lift Capacity
3-point hitch lift capacity
3,192 lb (1,448 kg)
Hitch category
Category 2
Rear PTO horsepower
37 hp
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
3,192 lb
Average
8,101 lb
Low
550 lb
High
29,750 lb
Rear PTO horsepower comparison
This model
37 hp
Average
132 hp
Low
11 hp
High
620 hp
John Deere 5050E Hitch and Rear Lift Notes
Hitch category note
Category matters as much as capacity. The John Deere 5050E is listed with Category 2, so implement pins and hitch width need to suit that setup
PTO and weight context
Use the rear lift spec first, then use rear PTO horsepower is 37 hp to judge whether the implement is sensible for real work
Rear implement matching
Rear hitch capacity is most useful when comparing actual implement weights, especially for rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box
John Deere 5050E 3-Point Hitch FAQ
How strong is the John Deere 5050E 3-point hitch?
The John Deere 5050E hitch data points to 3,192 lb (1,448 kg) for 3-point hitch lift capacity. In practical terms, this puts it in utility rear-lift tractor territory.
Is rear lift capacity always measured the same way?
No. For the John Deere 5050E, check whether the figure is measured at the hitch ends or 24 in / 610 mm behind the hitch. The behind-the-hitch number is usually more realistic.
Does hitch category matter on the John Deere 5050E?
Yes. The John Deere 5050E is listed as Category 2, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the John Deere 5050E?
Start with 3,192 lb (1,448 kg) for 3-point hitch lift capacity, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Is 37 hp rear PTO power enough for implements?
It depends on the implement. Use 37 hp for powered equipment matching, and use 3,192 lb (1,448 kg) for rear lift matching.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official deere.com website for official information before buying or lifting heavy implements.
