Quick answer:
The John Deere 5050E battery size is listed as 12 V.
Voltage12 V
John Deere 5050E Battery Specs
| Battery voltage | 12 V |
|---|
Battery Spec Comparisons Chart
Voltage comparison
John Deere 5050E Battery FAQ
| Replacement battery recommendation | The best replacement battery for a John Deere 5050E tractor is typically a Group 31 battery with a high Cold Cranking Amps (CCA) rating, such as 1125 CCA, which provides better starting power. Always check the specific requirements and dimensions to ensure a proper fit |
|---|---|
| Battery voltage | The John Deere 5050E tractor operates on a 12-volt battery system |
| Battery group size | The official battery group size for the John Deere 5050E tractor is 27 |
| Battery CCA | The recommended battery for the John Deere 5050E tractor has a Cold Cranking Amps (CCA) rating of 600. For the best performance, it’s advised to use the battery specified by your John Deere dealer |
| Battery location | The battery on the John Deere 5050E tractor is located in front of the radiator. To access it, you may need to remove side screens or other components as specified in the manual |
| Battery replacement steps | To replace the battery on a John Deere 5050E tractor, first, locate the battery under the right access step and open the flap. If necessary, remove the access step by unscrewing it, then disconnect the battery terminals before replacing the battery |
| Bad battery symptoms | Common symptoms of a bad battery in a John Deere 5050E tractor include hard starting or no response when trying to start, rapid battery drain, and visible corrosion on battery terminals. If the battery voltage is low, it may also indicate that it needs to be replaced |
Official information note
Mistakes do happen. Please check official deere.com website for official information.







