The John Deere X590 is 41 in wide and 52.2 in tall.
Width41 in (3 ft 5 in) / 1,041.4 mm
Height52.2 in (4 ft 4.2 in) / 1,325.9 mm
John Deere X590 Dimensions
Overall width
41 in (3 ft 5 in) / 1,041.4 mm
Overall height
52.2 in (4 ft 4.2 in) / 1,325.9 mm
Rear tread width
24 in (2 ft 0 in) / 609.6 mm
Tractor Size Comparison Chart
Overall width comparison
This model
41 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
52.2 in
Average
79.8 in
Low
36 in
High
156 in
John Deere X590 Extra Dimension Notes
Storage fit note
The John Deere X590 is a realistic candidate for garage-style storage in the right setup. With width 41 in (3 ft 5 in) / 1,041.4 mm and height 52.2 in (4 ft 4.2 in) / 1,325.9 mm, measure the door, not just the room.
Fitment note
For shed planning, the John Deere X590 should be checked with width at 41 in (3 ft 5 in) / 1,041.4 mm and height at 52.2 in (4 ft 4.2 in) / 1,325.9 mm. Door height and width are the usual deal-breakers.
Tread width note
The John Deere X590 rear tread width is listed at 24 in (2 ft 0 in) / 609.6 mm. Front tread width was not captured cleanly in this row.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
Recommended storage clearance: target about 96 in (8 ft) clear height; target about 96 in (8 ft) clear width.
For this class, doorway width and attachment clearance are major planning numbers.
Storage FAQ
Will it fit in a garage?
Because the John Deere X590 is 52.2 in tall and 41 in wide, door track height and side posts matter. Because it is length not captured long, the bay also needs about the tractor length plus attachment room of usable depth.
What size door should I check?
The clean check is 8 ft high, 8 ft wide and the tractor length plus attachment room deep. That gives margin over the listed 52.2 in height, 41 in width and length not captured length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 52.2 in for overhead clearance, 41 in for side clearance and length not captured for bay depth.
How much maneuvering room should I allow?
Without a captured wheelbase, the practical rule is simple: give the length not captured tractor length enough straight approach before the 8 ft doorway.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
