The John Deere 9520RT is 136 in wide and 145 in tall, with a 111 in wheelbase.
Width136 in (11 ft 4 in) / 3,454.4 mm
Height145 in (12 ft 1 in) / 3,683 mm
Wheelbase111 in (9 ft 3 in) / 2,819.4 mm
Ground clearance19 in (1 ft 7 in) / 482.6 mm
John Deere 9520RT Dimensions
Overall width
136 in (11 ft 4 in) / 3,454.4 mm
Overall height
145 in (12 ft 1 in) / 3,683 mm
Wheelbase
111 in (9 ft 3 in) / 2,819.4 mm
Ground clearance
19 in (1 ft 7 in) / 482.6 mm
Tractor Size Comparison Chart
Overall width comparison
This model
136 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
145 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
111 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
19 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 9520RT Extra Dimension Notes
Fitment note
For practical fit, the John Deere 9520RT dimensions to watch are width at 136 in (11 ft 4 in) / 3,454.4 mm and height at 145 in (12 ft 1 in) / 3,683 mm. Length matters for trailer space; width and height matter for access.
Wheelbase note
The John Deere 9520RT wheelbase is shown as 111 in (9 ft 3 in) / 2,819.4 mm. That number often tracks how stable the tractor feels.
Ground clearance note
The John Deere 9520RT clearance figure is 19 in (1 ft 7 in) / 482.6 mm. Use it when judging field access, row work or rough-property use.
Storage Tips
Large-farm storage is the right assumption for the John Deere 9520RT; tight sheds will be a problem.
Recommended storage clearance: target about 192 in (16 ft) clear height; target about 192 in (16 ft) clear width.
Expect large shed requirements, especially with duals, tracks or implements fitted.
The 111 in wheelbase is useful when judging trailer position and shed maneuvering room.
Because height is over 100 in, overhead clearance is the first storage risk.
Storage FAQ
Will it fit in a garage?
For storage fit, the useful question is whether the space clears 145 in height, 136 in width and length not captured length with margin. Around 16 ft high and 16 ft wide is the no-drama check.
What size door should I check?
Start with the hard numbers: 145 in high, 136 in wide and length not captured long. Then step up to a practical storage target of about 16 ft high and 16 ft wide.
Do attachments change the storage size?
Yes. Treat length not captured as the bare length only. If front or rear gear stays fitted, add roughly 8 ft to 15 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
For easier parking, keep the final approach straight and clear. With a 111 in wheelbase and 136 in width, tight offset entries are where damage happens.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
