The John Deere 2120 is 142 in long, 86 in wide, and 96.5 in tall, with a 74.8 in wheelbase.
Length142 in (11 ft 10 in) / 3,606.8 mm
Width86 in (7 ft 2 in) / 2,184.4 mm
Height96.5 in (8 ft 0.5 in) / 2,451.1 mm
Wheelbase74.8 in (6 ft 2.8 in) / 1,899.9 mm
Ground clearance14.6 in (1 ft 2.6 in) / 370.8 mm
John Deere 2120 Dimensions
Overall length
142 in (11 ft 10 in) / 3,606.8 mm
Overall width
86 in (7 ft 2 in) / 2,184.4 mm
Overall height
96.5 in (8 ft 0.5 in) / 2,451.1 mm
Wheelbase
74.8 in (6 ft 2.8 in) / 1,899.9 mm
Ground clearance
14.6 in (1 ft 2.6 in) / 370.8 mm
Rear tread width
15.5 in (1 ft 3.5 in) / 393.7 mm
Tractor Size Comparison Chart
Overall length comparison
This model
142 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
86 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
96.5 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
74.8 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
14.6 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 2120 Extra Dimension Notes
Size class note
The John Deere 2120 has the footprint of a utility tractor. It is better suited to farm work, loader jobs, hay, livestock properties and machinery-shed storage than tight residential spaces.
Storage fit note
For storage, the John Deere 2120 is more tall-garage or small-shed territory. With length 142 in (11 ft 10 in) / 3,606.8 mm, width 86 in (7 ft 2 in) / 2,184.4 mm, and height 96.5 in (8 ft 0.5 in) / 2,451.1 mm, a normal low garage may be tight.
Fitment note
The John Deere 2120 dimension set is length at 142 in (11 ft 10 in) / 3,606.8 mm, width at 86 in (7 ft 2 in) / 2,184.4 mm, and height at 96.5 in (8 ft 0.5 in) / 2,451.1 mm. Keep some margin for tire bulge, steps, fenders, lights and attachments.
Wheelbase note
The John Deere 2120 lists wheelbase at 74.8 in (6 ft 2.8 in) / 1,899.9 mm. Use this when comparing actual chassis size.
Ground clearance note
The John Deere 2120 clearance figure, 14.6 in (1 ft 2.6 in) / 370.8 mm, is worth checking for row crop, stubble and uneven ground.
Tread width note
The John Deere 2120 has a captured rear tread width of 15.5 in (1 ft 3.5 in) / 393.7 mm. Use it as a rear-stance reference only.
Storage Tips
Use a tall garage, barn bay or small machinery shed as the first storage check for the John Deere 2120.
Leave walking room around the parked tractor if you need to service, refuel or connect implements indoors.
Wheelbase is 74.8 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
Storage FAQ
Will it fit in a garage?
For storage fit, the useful question is whether the space clears 96.5 in height, 86 in width and 142 in length with margin. Around 10 ft high, 10 ft wide, and 18 ft deep is the no-drama check.
What size door should I check?
Because the John Deere 2120 is 86 in wide, a narrow door will be annoying even if it technically clears. Because it is 96.5 in tall, the door track must clear too. Use 10 ft high, 10 ft wide, and 18 ft deep.
Do attachments change the storage size?
Yes. If the bay only clears the listed 142 in length, it is too short once attachments stay on. Use about 18 ft bare, then add attachment length.
How much maneuvering room should I allow?
The 142 in length needs bay depth, but the 74.8 in wheelbase needs lineup room. Treat about 20 ft outside the shed as the practical approach zone.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
