The Case IH 2120 dimensions found are: length is 132.3 inches | 336 cm, width is 47.8 inches | 121 cm, height is 52.1 inches | 132 cm, and wheelbase is 78 inches | 198 cm.
Length132.3 inches | 336 cm
Width47.8 inches | 121 cm
Height52.1 inches | 132 cm
Wheelbase78 inches | 198 cm
Case IH 2120 Dimensions
Overall length
2120V: 132.3 inches | 336 cm | 2120E: 132.9 inches | 337 cm
Overall width
2120V: 47.8 inches | 121 cm | 2120E: 53.7 inches | 136 cm
Overall height
Hood: 52.1 inches | 132 cm | ROPS: 92.7 inches | 235 cm
Wheelbase
2WD: 78 inches | 198 cm | 4WD: 76.6 inches | 194 cm
Ground clearance
2WD: 13.6 inches | 34 cm | 4WD: 9.9 inches | 25 cm
Case IH 2120 Weight
2120V 2WD
4101 lbs | 1860 kg
2130E 2WD
4167 lbs | 1890 kg
2120V 4WD
4431 lbs | 2009 kg
2120E 4WD
4542 lbs | 2060 kg
Case IH 2120 Dimension Comparison Charts
Length comparison
This model
132.3 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
47.8 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
52.1 in
Average
100 in
Low
86 in
High
120 in
Wheelbase comparison
This model
78 in
Average
86 in
Low
70 in
High
105 in
Ground clearance comparison
This model
13.6 in
Average
15 in
Low
10 in
High
21 in
Floor space footprint
This model
44 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH 2120 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH 2120 is about 132.3 inches | 336 cm long, about 47.8 inches | 121 cm wide, and about 52.1 inches | 132 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH 2120 Dimensions FAQ
Is the Case IH 2120 a long tractor?
The Case IH 2120 has an average listed length at 132.3 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH 2120 narrow enough for tight storage?
Yes, based on width alone it is relatively narrow at 47.8 in, which is below the 74 in benchmark average. That is the better result for tight gates, sheds and trailer decks.
Is the Case IH 2120 tall for a shed or garage?
The listed height is low for the category at 52.1 in, which is below the 100 in benchmark average. That is better for low shed doors, but attachments and ROPS can still change the real clearance needed.
How much floor space does the Case IH 2120 need?
The bare footprint is about 44 sq ft from a 11 ft length and 4 ft width. That is below the 75 sq ft benchmark for this category.
Does the Case IH 2120 have a short or long wheelbase?
The wheelbase is average for the category at 78 in, which is close to the 86 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH 2120 have good ground clearance?
The listed ground clearance is average at 13.6 in, which is close to the 15 in benchmark average. It is neither especially low nor especially high for this category.
Will the Case IH 2120 fit easily in storage?
The fit numbers are fairly normal for the category: length 132.3 in, width 47.8 in and height 52.1 in. It should be judged as an average-size tractor for its benchmark group, not a tiny one.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
