The John Deere X106 is 48 in wide, with a 54.5 in wheelbase.
Width48 in (4 ft 0 in) / 1,219.2 mm
Wheelbase54.5 in (4 ft 6.5 in) / 1,384.3 mm
John Deere X106 Dimensions
Overall width
48 in (4 ft 0 in) / 1,219.2 mm
Wheelbase
54.5 in (4 ft 6.5 in) / 1,384.3 mm
Front tread width
48 in (4 ft 0 in) / 1,219.2 mm
Rear tread width
48 in (4 ft 0 in) / 1,219.2 mm
Tractor Size Comparison Chart
Overall width comparison
This model
48 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
54.5 in
Average
79.2 in
Low
34.8 in
High
190.5 in
John Deere X106 Extra Dimension Notes
Storage fit note
The John Deere X106 may be garage-friendly in some setups, but only after checking the actual door height and width. With width 48 in (4 ft 0 in) / 1,219.2 mm, measure before assuming fit.
Fitment note
The John Deere X106 footprint is defined by width at 48 in (4 ft 0 in) / 1,219.2 mm. For storage, the tight point is usually the door opening.
Wheelbase note
For the John Deere X106, wheelbase is 54.5 in (4 ft 6.5 in) / 1,384.3 mm. It is an important part of the size story.
Tread width note
The John Deere X106 gives front/rear tread specs of 48 in (4 ft 0 in) / 1,219.2 mm at the front and 48 in (4 ft 0 in) / 1,219.2 mm at the rear. Use them when stance matters.
Storage Tips
Garage-style storage may work, but judge it against 8 ft wide, not the exact tractor dimensions.
Use the bare dimensions only as a starting point; a practical storage target is 8 ft wide.
Expect large shed requirements, especially with duals, tracks or implements fitted.
The 54.5 in wheelbase is useful when judging trailer position and shed maneuvering room.
Storage FAQ
Will it fit in a garage?
At 48 in wide and 54.5 in wheelbase, a garage may work only if the door and bay are bigger than the tractor, not just equal to it. Use about 8 ft wide before counting attachments.
What size door should I check?
For this storage class, the safer number is 8 ft wide. That keeps the doorway and bay ahead of the tractor’s actual height not captured height, 48 in width and length not captured length.
Do attachments change the storage size?
Yes. The published length not captured length is useful for the bare tractor, but the real storage number is the longest point from front attachment to rear attachment.
How much maneuvering room should I allow?
Use the 54.5 in wheelbase as the handling clue. If the approach is angled, a 8 ft door may still feel tight, so leave about 11 ft to straighten up.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
