The John Deere X110 storage check is fairly forgiving compared with bigger farm tractors. With width 51.8 in (4 ft 3.8 in) / 1,315.7 mm, the door opening is the main issue.
Tread width note
The John Deere X110 tread-width spec gives 51.8 in (4 ft 3.8 in) / 1,315.7 mm at the front and 51.8 in (4 ft 3.8 in) / 1,315.7 mm at the rear. That is the stance-focused size number.
Storage Tips
Garage-style storage may work, but judge it against 10 ft wide, not the exact tractor dimensions.
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
Expect large shed requirements, especially with duals, tracks or implements fitted.
Storage FAQ
Will it fit in a garage?
For storage fit, the useful question is whether the space clears height not captured height, 51.8 in width and length not captured length with margin. Around 10 ft wide is the no-drama check.
What size door should I check?
Start with the hard numbers: height not captured high, 51.8 in wide and length not captured long. Then step up to a practical storage target of about 10 ft wide.
Do attachments change the storage size?
Yes. Treat length not captured as the bare length only. If front or rear gear stays fitted, add roughly 8 ft to 15 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
Wheelbase was not captured for this row, so use the length not captured overall length and 51.8 in width as the parking guide. About a clear straight approach before the doorway of straight approach is the safer target.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
