The John Deere 8010 is 238 in long, 96 in wide, and 112.5 in tall, with a 120 in wheelbase.
Length238 in (19 ft 10 in) / 6,045.2 mm
Width96 in (8 ft 0 in) / 2,438.4 mm
Height112.5 in (9 ft 4.5 in) / 2,857.5 mm
Wheelbase120 in (10 ft 0 in) / 3,048 mm
John Deere 8010 Dimensions
Overall length
238 in (19 ft 10 in) / 6,045.2 mm
Overall width
96 in (8 ft 0 in) / 2,438.4 mm
Overall height
112.5 in (9 ft 4.5 in) / 2,857.5 mm
Wheelbase
120 in (10 ft 0 in) / 3,048 mm
Tractor Size Comparison Chart
Overall length comparison
This model
238 in
Average
138.9 in
Low
63 in
High
346.3 in
Overall width comparison
This model
96 in
Average
64.6 in
Low
20 in
High
144 in
Overall height comparison
This model
112.5 in
Average
86.2 in
Low
39.8 in
High
152 in
Wheelbase comparison
This model
120 in
Average
79.2 in
Low
34.8 in
High
190.5 in
John Deere 8010 Extra Dimension Notes
Size class note
The John Deere 8010 should be judged as a large farm tractor before deciding if it fits storage or transport. It is a large farm tractor, so shed height, gate width, trailer space and implement room matter more than they would on a compact machine.
Storage fit note
The John Deere 8010 is not something to squeeze into tight domestic storage. With length 238 in (19 ft 10 in) / 6,045.2 mm, width 96 in (8 ft 0 in) / 2,438.4 mm, and height 112.5 in (9 ft 4.5 in) / 2,857.5 mm, use machinery-shed expectations.
Fitment note
The John Deere 8010 has listed dimensions of length at 238 in (19 ft 10 in) / 6,045.2 mm, width at 96 in (8 ft 0 in) / 2,438.4 mm, and height at 112.5 in (9 ft 4.5 in) / 2,857.5 mm. Treat them as the starting point for storage and trailer planning.
Wheelbase note
The John Deere 8010 wheelbase is listed at 120 in (10 ft 0 in) / 3,048 mm. Wheelbase helps explain how planted or compact the tractor feels compared with similar models.
Storage Tips
Leave room around the John Deere 8010 for mirrors, steps, tires, cab/ROPS and attachments.
Use the 120 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Overhead clearance should be measured at the lowest part of the doorway, not the tallest part of the shed.
Storage FAQ
Will it fit in a garage?
With 112.5 in height and 96 in width, the doorway is the first limit; with 238 in length, bay depth is the second. Start with 12 ft high, 12 ft wide, and 30 ft deep, not the bare dimensions.
What size door should I check?
Because the John Deere 8010 is 96 in wide, a narrow door will be annoying even if it technically clears. Because it is 112.5 in tall, the door track must clear too. Use 12 ft high, 12 ft wide, and 30 ft deep.
Do attachments change the storage size?
Yes. The bare tractor is 238 in long, 96 in wide and 112.5 in tall; a loader, mower deck, ballast box or rear implement can push the parked size past those numbers.
How much maneuvering room should I allow?
If attachments stay fitted, maneuvering room must be based on the attached length, not just the 238 in bare tractor length and 120 in wheelbase.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
